If your iPhone not turning on or iPhone black screen, you may think you’re going to have to buy a new one. That may be reasonable if the issue is bad enough, but there are a lot of ways to repair your iPhone before you decide it’s gone. If your iPhone not turning on or iPhone black screen, it can be very stressful, not only do you face unexpected costs to repair it, but you could also possibly have lost your records, including your contacts and valuable images.

Your iPhone not turning on, and you’re looking for help. It’s a problem that, depending on the source, can be simple or difficult to solve. In this article, I’m going to help you find out why your iPhone not turning on and show you how to repair your iPhone black screen too.

Why doesn’t my iPhone not turning on?

Your iPhone not turning on because either the software crashed and needs to be reset or repaired, or the hardware issue prevents your iPhone from turning on.

1. Failure of the battery
   Confused with the black screen of your iPhone? You could be dealing with a depleted battery. If you found that your phone turned off when you still had a lot of batteries, or if your system was getting hot quickly, you may have some power problems. All Apple batteries become less powerful as they age and eventually lose their ability to hold the charge. As a result, their output deteriorates, particularly in a low charge, causing unexpected shutdowns.
2. Due to water Damage
   While many devices today boast waterproof designs, it is often the case that even a small amount of liquid will damage some internal components, leaving you with a dead iPhone. If you think your iOS system is not responsive to liquid damage, take a look at our Water Damage Guide.
3. Physical damages
   If you dropped your iPhone recently, it might stop working, even if it doesn’t show any physical harm. To check for this, you can shine a light on your screen to check for damage, and also try calling your phone to see if it rings or vibrates. If you’ve had your screen broken for a while, it’s likely that repeated use might have caused more harm to your phone, making it look like it’s off.
4. Software problems
   Occasionally, because of technical problems, the iPhone won’t turn on. Some applications and updates to iOS can cause problems, and sometimes, if your phone crashes when your operating system updates, your iPhone may also fail to respond.

How to Fixing an iPhone not turn on?

1- Charge your battery
Completely discharged batteries are the number one source of iPhones not being switched on. Plug in your charger (make sure the plug is turned on!) and wait 30-60 minutes so that your system can get enough power to start again. Once you’ve been waiting for this amount of time, try turning it on. Check out our battery life tips if you want the battery to last longer. It’s worth checking two separate chargers to null out cable problems as well. If you find that the defective battery is the defective one, we will replace it for you.

2- Simple Restart / Force Restart
If your iPhone still doesn’t power on after charging, move on to the classic “Have you tried to turn it off again? “Step. Restart your iPhone by holding down the on/off button for a few seconds (usually, you’ll find it on the right edge, but if you own an iPhone 4/5 / SE, you’ll find it on the top edge). If you own an iPhone X, you’ll need to click the volume-up button and the side button. You might also want to try restarting the iPhone? Check out our iPhone restart guide.

3- Reset to Factory Settings via iTunes (Data Loss)
If you don’t get your iPhone turned on in any of the previous measures, you can try restoring factory settings via iTunes.

4- Please contact Apple Support
Even if you haven’t tried any of the previous measures, you can check to see if your iPhone is still under Apple’s warranty. If so, and your problem isn’t caused by hardware or water damage, please visit the Apple Support website-they might be able to repair the problem for free.

5- Reset iPhone Proximity Sensor

Another uncommon case that causes your iPhone not to turn on is a proximity sensor failure that dims the iPhone screen when you keep it to your face. This allows the screen to remain dark even though the phone is on and not close to your face. To reset the proximity sensor on your iPhone:

• Use the instructions from earlier in this article to perform a Hard Reset on your iPhone.
• The screen should work when your phone starts up again.
• Tap the Settings app for this.
• Tap General
• Tap the reset.
• Click the reset All Settings button. This will uninstall all your iPhone preferences and settings, but it won’t delete your files.

How to Fix Iphone Black Screen Issue

The iPhone screen goes black is also a common issue that most Apple users face. Although this is a common problem, there are not a lot of easy fixes for this issue. It’s not anything that can be solved with only a few changes here and there, because more often than not, it’s not a software problem.

Rather, the iphone black screen is normally black because of a snag in the circuitry of the computer itself. This rules out any easy hacks you can perform on your own that could solve this problem. But before you turn to a reliable iPhone repair service, here are a few things you can do.

Failure of the battery

Battery failure could be another cause for your iPhone screen to turn dark. Plug in the charger and check if the charging logo or the Apple logo appears. If yes, the problem could be with the battery itself. In this scenario, you can go to the service centre to repair the charger. A frail battery will not be able to stay functional and will cause the iPhone to shut down at random.

Application Issue

If you’re having a blackout screen specifically after you’ve made any phone adjustments, such as downloading an app, then uninstalling the same one could be the most reasonable solution to the problem. See if that brings your show back to life.

Screen Damaged

Another factor, and perhaps the most undesirable of all, is that the screen has been damaged, which causes it to turn black. So, if any other move has failed, schedule a visit to your trustworthy service centre that has a good reputation for performing iPhone repairs quickly and with care.

The Monitor connector cable may have been dislodged

This is most likely to have occurred if your iPhone has fallen or is likely to have suffered a shock. Such incidents could lead to the dislodging of the monitor connector cable from its slot. If that’s the cause, you can be lucky as it only needs the iPhone to be opened and the adapter to be placed back in its slot so that the screen can come back alive again.

These are some of the steps you should take to patch your iPhone display in case it’s dark. While these solutions are known to work on this particular issue, they may not help if it is a complex hardware issue. It is highly recommended that you get in touch with experienced technicians who specialise in iPhone repair to fix your computer.

Tried Everything. Still Your iPhone not turning on?

Dr.Fone – System Repair (IOS): If your iOS device continues to malfunction, the general solution is to restore iTunes. Nice if you did a backup, and tragic if you didn’t. Let alone all the stressful iTunes bugs. That’s why Dr. Fone-System Repair is rolling out. It can quickly resolve any kind of iOS system issues and get your phone back to usual. Most importantly, you can do it by yourself in less than 10 minutes. Some of the Issues it can fix are as follows:

• Fix various iOS system issues like white Apple logo, boot loop, etc
• Fix most iOS issues without data loss.
• Work for all models of iPhone, iPad, and iPod touch. iOS 14 supported.
• Easy & simple process. Everyone can fix the iOS system with a few clicks.
• Stuck in Recovery Mode
• Stuck in DFU mode
• White Screen of Death
• iPhone Black Screen
• iPhone Boot Loop
• iPhone Frozen
• iPhone Keeps Restarting

How to Fix iOS System Issues With Dr.Fone – System Repair (iOS System Recovery) ?

Now Dr.Fone offers 2 iOS system recovery modes to fix issues more efficiently. The Standard Mode is able to fix most common system issues without data loss, while the Advanced Mode fixes more stubborn problems, but it will erase all data on the device. There are 2 types of repair modes standard and Advanced Modes.

These the 3 steps process to fix the iOS system to normal

Dr.Fone is surely not the only solution to fix iOS system issues, but it surely is the easiest iOS system recovery solution with the highest success rate.

You can see this screen when the iOS firmware is verified. Click on “Fix Now” to start repairing your iOS and to get your iOS device to work normally again.

What do you do if your iPhone wont turn on at all?If your iPhone won’t turn on, most of the time a simple restart will get it back up and running. If you can’t restart your iPhone, then make sure it’s charged. You might need to replace the Lightning cable and make sure the power source is working properly.

How do you fix a phone that wont turn on?Press your device’s Power button and hold it down. You should only have to hold the Power button down for ten seconds, but you may have to hold it down for thirty seconds or longer. This will cut the power to your phone or tablet and force it to boot back up, fixing any hard freezes.

How do you force your iPhone to turn on?Restart your iPhone
1- Press and hold either volume button and the side button until the power off slider appears.
2- Drag the slider, then wait 30 seconds for your device to turn off.
3- To turn your device back on, press and hold the side button (on the right side of your iPhone) until you see the Apple logo.

What would cause my iPhone to not turn on?There can be many reasons for this, but the four most common are:
1- Battery failure. Confused by your iPhone’s black screen? …
2- Water damage. …
3- Physical damage. …
4- Software issues. …
5- Charge your battery. …
6- Simple Restart / Force Restart. …
7- Restore to Factory Settings via iTunes (Data Loss) …
8- Contact Apple Support.

Why has my phone suddenly stopped working?If you could remove your mobile battery, remove it first. then again plug in your battery and restart it. Are you staying in a area where signal is too poor then this is a common issue your mobile may suddenly get switch off due to uneven mobile signal.

What do I do when my iPhone won’t turn on?When your iPhone won’t turn on, you can try the steps below to restart it.
1- Charge your iPhone. This can solve a small part of the issues.
2- Hard reset your iPhone. Press and hold the Power button and the Home button for about 10 seconds. Release them when the Apple logo appears.
3- Use Dr.Fone to fix iPhone won’t turn on without data loss. Connect your iPhone to computer and follow the instructions to download the firmware using Dr.Fone. It will then fix your iPhone automatically.
4- Restore iPhone using iTunes.
5- Restore iPhone in DFU Mode. This is the ultimate solution to fix iPhone problems. But it will erase all data on iPhone.

Why did my iPhone go black?When an iPhone screen goes black, we should firstly determine whether it’s caused by software issue or hardware issue. An corrupted update or unstable firmware can also the iPhone malfunction and turns into black. Usually this can be resolved by a hard reset or restore. You can follow the solutions here to fix iPhone black screen for software reasons.

If none of them fix the issue, the chance is your iPhone black is caused by hardware problems. There usually isn’t a quick fix. So you can visit the Apple Store nearby for further help.

What causes iPhone Black Screen of Death?An iPhone screen may turn black or remains on a black screen if its firmware has crashed, which is a minor problem, or if it has a serious hardware issue that’s usually caused by liquid or physical damage. One way to know what the issue is, is to determine if your iPhone has some signs of physical or liquid damage.

How do I fix black screen of death?It may seem strange that you can receive calls on an Android device with a black screen. If this happens to you, hold down the power button for 30 seconds, then let it go. Don’t touch the power button again for two minutes, after which call it or use Find My Device to see if it will ring.

What does black screen of death mean?The black screen of death is an error screen displayed by some operating systems after encountering a critical system error which can cause the system to shut down.