Connect with us

Tech

Pros and Cons of Using Free Data Recovery Software

Published

on

Free Data Recovery Software is one of the most popular software that can effectively retrieve deleted data. It’s absolutely free yet just as effective as many commercial software. It will restore any data back to its original state from NTFS, FAT, or FAT32 partitions. The software stores data while keeping the folder structure when possible. It’s also easy to use because it uses a familiar Explorer-like interface. The software does not require installation because it is a stand-alone application (.exe). Compared to other programs, it has higher recovery success rate.

Well, the best thing about free data recovery software is that it’s free. Nowadays, it’s rare to come by data recovery software that’s free without ending up as a bogus product. Another good thing about this software is that it does not require you to go through any tedious installation process. Since it is simply an.exe file, you can launch it straight out of a flash drive, CD, or external hard drive. Using software that requires installation will actually reduce the chances of data recovery because the installation process will overwrite your data. It’s best to use this software straight out of an external or second drive.

However, some users might get confused with free data recovery software because of the numerous partitions that will show up in the recovery process. If you’re unfamiliar and don’t have enough patience to go through the partitions, then you will not recover your data. Another drawback is when you keep installing programs after the data has been lost, there will be less chances of recovering them. This increases the risk of disk-swap.

Of course, these minor drawbacks can’t take away the overall benefits you’re able to get from this program. Once you lose the data, use free data recovery software right away to recover them. Given its success rate and provided that the computer goes through few activities, the software will unearth lost data efficiently.

google news

Tech

Invent New Magic Tricks With Old Magic Principles

Published

on

By

It is said creativity is about giving old things new uses. When it comes to magic, same principles applies. Many creative magic tricks are actually derived from old tricks or effects. Let’s take a look at the appearing handkerchief in decanter trick. The original effect is a handkerchief quickly appearing inside a decanter achieved by the pulling of an invisible thread. This can become totally different in appearance if milk bottle is used instead of decanter, or any other kind of bottles. Or you may try to use a tie instead of handkerchief. The possibilities are unlimited.

Sometimes a very little change made in an old magic effect can make a huge difference. The change may be even smaller than using a different container. We now compare another trick that look completely different from the decanter trick, but in fact utilizes the very same thread pulling principle.

The trick is called the Orrin’s Spider Web Trick. The trick effectively uses the same principle as the old decanter trick. This trick is to produce a card on a spider figure on a table also using the pulling thread principle. The table is painted with a spider web background which could help hiding the thread and the secret opening on the table. A card is used instead of a handkerchief and a spider figure is used instead of a decanter.

Another important change made to the tricks is the pulling method. Originally the thread is pulled by an assistant or a counter weight. But Orrin improved the pulling by incorporating the action into another flourish action which is turning the table. The turning of the table also helped in concealing the path of the card. So the effect becomes like this: the magician display a spider figure on a web. He then turns the web and the chosen card mysteriously appears at the mouth of the spider.

We are not saying that the magician Orrin created the effect by substituting the objects like that. We are just illustrating how this principle can be used to produce an innovative effect from an old trickery.

The steps to change the old decanter trick into the spider web trick may be as the following. First, we make a different object to appear. We use a card instead of a handkerchief. Second, we change the appearing location from a transparent decanter to a spider figure. Third, we change the pulling method from application of a direct straight line force to a turning torque force. Forth, the appearing location is moved instead of the appearing object. Fifth, a disguising background is used to conceal the thread which allow the trick to be performed more close up.

From the spectators’ point of view, the two magic performance maybe very different. But in fact, they use the very similar principle in substance.

google news
Continue Reading

Tech

Tips To Help You Achieve Success As A Real Estate Investor

Published

on

By

If you are looking for a great way of building your net worth, investing in real estate is a great idea. You can make a lot of money if you do it the right way. However, if you don’t follow the right techniques, this venture can cost you a lot of money. Therefore, we have shared a few tips with you that can help you achieve success as a real estate investor.

Opt for a Good Location

Location is the first thing that people consider when they need to buy a residential, vocational or commercial properly. Ideally, the property you are going to buy should be near a workplace and school. Similarly, if it’s close to the marketplace, people can go there without burning a lot of gas or killing a lot of time. Therefore, it’s much better to choose a better location.

Upgrade or Renovate Your Property

It’s better that you upgrade your property features to make it more appealing. For instance, you may add home automation, such as automated lighting. The same is true about commercial real estate as well.

If you offer wheelchair lifts, for instance, it can make your property more useful for people with disabilities. This will attract many more buyers. Actually, it all depends upon how convenient your property is. If your property offers features that can help people make their lives easier, more people will show their interest in what you offer.

Improve Property Conditions

More buyers will contact you if your house or apartment is well maintained. However, make sure you don’t go beyond the limits. In other words, you may not want to spend an arm and a leg just to make your property more beautiful. It won’t increase the value of your property exponentially. Although it may be worth it in certain situations, spending too much is not a good idea.

Let’s take a look at a few tips that can help you make your property well-maintained.

Kitchen: if you do it right, your kitchen can increase the value of your property by up to 80%. Therefore, if you renovate your kitchen by spending $15,000, you can sell your house at 80% higher price.

Plumbing: we all need clean running water. Keep in mind that rusty pipes pose a health hazard in addition to reducing the beauty of your house.

Landscaping: If you maintain your landscape properly, it can add ambience to your house or apartment. In addition, landscaping helps reduce your energy bills.

Do Your Research

Make sure you consider the type of people that you think will be suitable if you want to sell or rent your house. If you want to get the highest return on your investment, make sure you contact the right people. Otherwise, you won’t be able to earn a lot of profit or find good buyers. Opting for the right clients can help you find a great deal.

Conclusion

So, these are a few tips that you can follow if you want to get the most out of your investment. Hopefully, you will find these tips pretty helpful.

google news
Continue Reading

Tech

Patent Process Outsourcing in India – Emerging Trends

Published

on

By

Legal Process Outsourcing (LPO), a forte sector within the Knowledge Process Outsourcing (KPO) space, is attracting international law firms who are outsourcing legal work to India. Within the LPO industry, it is patent outsourcing, which is catching up faster than the rest of LPO jobs. While major firms in the US quote up to $15,000 for preparing and filing a patent application, companies based in India deliver the same work for $2,500-3,500 in India. This allows companies to file additional patents within the same budgets.

India’s participation in the outsourcing market has been exceptional in the last decade. Both, overseas customers and Indian entrepreneurs constantly search for newer areas to render professional and commercial support at reasonable costs with quick turnaround. The Indian involvement in the patent-related market is still in a nascent stage. In my view, it will soon take off – especially since India has many lawyers and even more people in science and engineering streams. A marriage between them will surely support the patent-market.

Patent outsourcing includes literature searches, prior art searches, technology and patentability assessment, infringement, FTO, Ideation, IP Valuation, patent proof reading, patent claim mapping, drafting response to objections by US examiners, preparing/filing/prosecuting trademark applications, infringement studies, other IP litigation, IP asset management, Patent mining and administration.

During the last few years dozens of Indian outsourcing services firms has emerged and most of them are making good business. These firms offer variety of patent related research.

Technology changes rapidly and it is often difficult to keep track of all the trends swirling on the Internet, all the ideas bubbling in academia, and the range of innovations you and your competitors are working on. The outsourcing firms provide sophisticated service to track technology trends, juxtaposing academic research, market data and patent filings information worldwide. Cheers , with an exception help you put together your technology roadmap and identify innovation partners around the world, along with other IP services. IP Landscape Reports are detailed “as is” analysis of an existing technology. These reports cover broad landscape on areas of research and development – such as an entire product category – that are critical to the clients. These reports are based on analysis of several hundreds or even thousands of patents and other unstructured information.

google news
Continue Reading

Tech

Issue Management Methodology for Tracking Project Issues

Published

on

By

1. What is an Issue?

An issue is an incident, circumstance, problem or inquiry that affects or potentially affects the timely delivery of the project, product or service, it may also impact the quality of deliverables and the cost of production.

Some projects are ongoing and the definition of an issue is a little different. A help desk defines an issue as a request for help that requires a response. A service department keeps track of service requests as issues. A software maintenance group tracks reports of software bugs and enhancement requests as issues.

Because of the impact issues have on a project, product development or ongoing service, issue management is an important aspect in any management methodology. This issue management methodology promises to make the handling of issues a seamless part of your larger scoped methodologies rather than a process separate from them.

It is usually not hard for team members to identify issues, but it is still worth having a working definition of an issue. Remember that the more ambitious your project the more issues will arise.

Action item: The project team must be made aware of what issues are, provide some examples, and ask other team members to provide some examples.

2. Requirements

A central repository of issue information easily accessible to all team members, because it is good for team morale and productivity to know that their issues are being addressed. An automated central repository like Issue Tracker [http://issue-tracker.glm2.com] is desirable because it make the issue management and reporting much easier.

Action item: Choose a central repository for your issues.

An issue manager is the person chosen to oversee all issues. It can be the project manager, team leader or another person in a responsible leadership position. The issue manager is responsible for making sure that there is consistent, disciplined and continuous progress made on all issues. The issue manager is accountable to upper management for the progress made on all issues. The issue manager communicates issue progress to the team, upper management and all stakeholders.

Action item: Appoint an Issue Manager and notify the issue manager of their role and responsibilities.

This issue management methodology represents best practice for managing issues. However, the goal is to have a successful project, product development or service, the goal is not to follow a methodology fanatically.

Action item: Adapt the methodology so your project’s success is maximized.

3. Steps

3.1 Discovery

Issues can arise at any time. When an issue is discovered it is recorded in the central repository.

It is important to allow issues to be recorded by a broad group of people including team members, upper management, users, customers, stakeholders, vendors and contractors. It is important because if there are barriers to reporting an issue then there is an increased chance that the issue will go unrecorded. You cannot address issues that you do not know about. It is not necessary that everyone has access to central repository, but the more you can allow the better.

Action item: Set up access to the central repository for those people that need it.

3.2 Recording

Training people to identify issues is often unnecessary, however getting people to record the issue in the central repository will take some training and encouragement. For example, a team member may mention an unrecorded issue to the project manager during a coffee break or other informal occasion, this team member needs some encouragement to record such issues in the central repository.

For all kinds of issues, prevention is better than correction. Also, issues tend to be less severe if they are addressed earlier rather than later. This means that every effort should be made to report issues as soon as they are discovered, instead of waiting for the issue to become “serious enough” before recording it. Do not be afraid of duplicating an issue or overlapping with existing issues, it is better than missing an issue.

A complete description of the cause of the issue should be recorded in the central repository. Resist the temptation to describe the issue in terms of a solution. Any implication of the issue should be recorded. Attach any supporting documentation, screenshots, report output, faxes, error messages and other media that describes the issue.

The person who is recording the issue can make a recommendation for a solution, if they have one. This person

should also assign the issue if possible, even if it is only assigned to the issue manager for re-assignment.

When an issue is initially recorded it should be recorded in the central repository with a status code that reflects the fact that it is new issue and has not been reviewed. An attempt should also be made to categorize and rank the severity of the issue.

The date and who created the issue should be recorded in the central repository. This is done automatically for you in systems like Issue Tracker.

Many teams describe issues in terms of the desired solution, leaving others to deduce the actual issue. This is not best practice since it limits the scope of possible creative solutions. As an example a badly worded issue: “We need more people.” There is no indication in this example of what the issue actually is, so finding alternative solutions is impossible. If the example issue had been worded as “The shipping department has swamped us with product, there is a possibility of spoilage if we cannot get the product delivered.” With the issue worded this way perhaps the shipping department can become aware of how there actions are causing issues down the line and adapt their actions.

3.3 Initial Review

The initial review is a triage of new issues. It is usually performed by the issue manager or deputies who are familiar with the scope and priorities of the project. If the team is small the entire team can meet for the review. For each new issue the status, category and severity are reviewed and the issue assigned to someone for action and optionally an owner is identified as follows.

Sometimes the same person who records the issue may be doing the initial review, so these two steps can be fused into one in this situation.

3.3.1 Issue Status

A decision is made about the next state of the issue. (The previous state was “new”.) The next status of the issue reflects the nature and timing of the action to address the issue. It is one of the following:

  • open: immediate action will be taken to address the issue
  • deferred: action will be deferred until some future time
  • referred: action will be taken by some other group, probably because the issue is beyond the current
    scope
  • cancelled: no action will be taken now or in the future

3.3.2 Categorize the issue

A first attempt at categorizing the issue was made when it was first recorded. But, now during the initial review the category can be refined.

The proper issue category is helpful when prioritizing the resources required to address issues. It is especially useful for reporting purposes.

Action item: Discuss with the team how best to categorize the issues you expect to get, and document the categories that will be used.

3.3.3 Rank the issue severity

The severity reflects the importance of getting the issue resolved. Obviously, you want to direct resources at the most important issues before the lesser ones.

Action item: Choose a small set of severity codes that have a clear ranking. For example: Trivial, Standard, Important, Critical. Some people prefer: Low, Medium, High, Very High.

3.3.4 Assignment

From the start, the next person to take action on the issue must be assigned to the issue and notified. Issue Tracker will automatically notify the person assigned to the issue via email.

If the issue description is incomplete, the issue can be assigned to the appropriate party to gather the information necessary to make the issue description clear.

Assign a person and not a group. Experience has shown that assigning issues to individuals leads to greater accountability than assigning issues to groups. An individual can be confronted about lack of progress, it is much harder to confront a group of people. A group can be represented by a group leader, so you can assign an issue to the group leader who will take action to reassign the issue to correct group member who will actually address the issue.

3.3.5 Ownership

It should be possible to decide which stakeholder is the owner of the issue. Having an issue owner is a way of recording who is accountable for the issue’s resolution.

Owners must review the issues they own for progress to resolution. If the progress is not sufficient the issue manager should be told so that the situation can be remedied.

3.4 Taking Action

The process to address an issue iterates over the following sub-steps until the issue is resolved.

  • The person assigned to the issue, takes action to address the issue.
  • The person assigned to the issue, documents the action taken as an issue event in the central repository. An issue event has the person’s name, the date and a description of the action taken.
  • Some issue processes require an approval step before further action can be taken. This approval should take the form of signing off on a proposal. While paper based signatures are acceptable, an automated system is better. Issue events in Issue Tracker can by used to sign off, since a user is required to log in to identify themselves, this is as good as a paper signature.
  • If there is documentation to support the action taken, like a cost-benefit analysis of a proposed system change, the supporting files are attached to the issue.
  • The process of finding a solution may help refine the issue description. This refinement should be reflected in updates to the issue description and title, as well as attaching further supporting files. It may also require that the issue be re-categorized.
  • If the next iteration is the responsibility of another person the issue is reassigned.
  • If the issue is resolved in this iteration, the status is updated to reflect the fact that the issue is inactive.

Notice that the action taken may involve reassigning the issue, changing status, refining the issue description, changing the category of the issue. All of these changes should be recorded in the central repository. Changing of status, category and severity are automatically logged for you in an automated system like Issue Tracker.

3.5 Ongoing Oversight

Consistent and continuous evaluation of issues by the issue manager and the team must take place to bring the issues to resolution. This can take place through a periodic review of all active issues in the central repository with the team and a separate review with the stakeholders.

Escalate issues as needed by re-assigning or by changing issue ownership.

Report and communicate progress on all issues to upper management and to the team, subscriptions can be used by upper management and the team to follow progress on individual issues. This reporting can be integrated into project status reporting.

Analyze issue progress and adapt actions. The central repository should be able to provide feedback on how efficiently the issues are proceeding from creation to resolution. If it is taking too long to resolve important issues, then the issue manager must find ways to improve the turn-around time.

4. Finally

The following are a few further action items

Action item: Distribute copies of this issue management methodology to team members and stakeholders so that everyone knows how and why issues are managed.

Action item: Adapt and scale this issue management methodology to suit you project’s scale and quirks.

Action item: Create your central repository, and get started today.

This issue management methodology has evolved over many years. It evolved from experience on projects with budgets from $500,000 to $50,000,000 which had a total number of issues ranging from a few hundred issues to many thousands. In half the cases the project team was physically dispersed in several countries.

google news
Continue Reading

Tech

10 of Our Favorite Video Conferencing Tips

Published

on

By

Video conferencing is a highly technical, vastly complicated technology that has been structured from the ground up to be as simple and user-friendly as possible. Even though video conferencing has only really become a viable medium in the past few years, it’s taken off as an attractive option when communicating with friends, families, colleagues, and clients. Despite its simplicity, there are many things you can do to – or not do – to ensure a great virtual meeting.

1. Give and take — questions and answers — are the bedrock of communication. In a video conference, you are hampered by not having everyone in front of you. This is especially apparent when you ask a question, as it is sometimes difficult for your participants to know who you are talking to. Make sure you say a person’s name at the beginning of your question.

2. An issue specific to virtual meetings is the mute button. Mute buttons are essential to having a well-ordered and quiet meeting, and their use should be encouraged. However, they can slow up Q&A sessions, especially impromptu ones. When you ask someone a question, make sure you give them a few seconds to respond. This allows them time to unmute themselves.

3. With everyone separated, it’s difficult to get a consensus. Asking people to raise their hands if they agree only really works in smaller video conferences where you have a window for each person. On larger calls or multiple meeting rooms, it can be impossible to get an accurate answer. Couch your questions to address the least amount of responses. For example, don’t ask if everyone understands; ask who doesn’t understand.

4. Video conferencing technology is hi-tech, but that just means it will do what it is supposed to. Shouting or speaking loud is not only annoying, but it also shows inexperience with virtual meeting technology. Speak in a normal tone of voice. Don’t worry, they will hear you.

5. If you can’t help but worry that people can’t hear you, test your sound first. Get your participants to introduce themselves at the beginning of the conference. Not only will this help break the ice, but will also allow you to hear their volume and sound quality. If you’re still anxious about your own output, simply ask someone if they can hear you well.

6. It may feel counterintuitive, but you shouldn’t look very often at the people on your screen, especially when you are addressing them. The best place to look while speaking is directly into the camera lens. Your participants will get the impression that you are looking directly at them. This creates a more trustworthy, congenial experience between them and you.

7. If you’ve done your preparations correctly, you know exactly how far you can move while in front of your camera. To help you hit your “mark,” use your mouse as your anchor point. Hold on to the mouse naturally while setting up your camera. Then, as you move back and forth pay attention to how far your arm bends or straightens. When you’re live, you’ll be able to keep yourself on screen without distracting yourself.

8. Unless you have dropped $50,000 to $150,000 on your video conferencing setup, you won’t have perfectly smooth, indistinguishable-from-real-life video. So, you need to work within the limitations of you and your participant’s equipment and bandwidth. The most important thing to remember is to keep your gestures small and your movements slower than normal. A little attention to this detail will minimize any choppy effects.

9. Your cloths say a lot about you, but through a video conference, some clothes say it loudly. To provide the best view of you, try to dress in light pastels and muted colors. Bright, loud colors can make your skin look weird on screen. Don’t wear all-light or all-dark colors to avoid any white balance or contrast issues. Busy patterns too are something to avoid.

10. While your clothes are telling your participants about you, so is the spot that you chose to do your conference from. Other than the obvious point that what you have on your desk and behind you will make impressions on your participants, they can also be detrimental to your video quality. Try to have a clean or bare background with a neutral color. Keep all camera-visible areas neat and decluttered. Not only will you look better on screen, it says something about how you work.

Video conferences are a great way to save money, time, and energy while still getting as much or more work done than before. They are hi-tech and worth a lot of “cool” points in the business world. If you put in the time and planning, your video conferences can be like the technology itself: complicated, yet smooth and on the cutting edge.

google news
Continue Reading

Tech

Fixing "Inf File Txtsetup(.)sif is Corrupt…" Error Message

Published

on

By

Is your Windows XP based system completely unbootable? Or the booting process halts in between? Or you receive an error message at the start of the booting process? If the answer for any of the above questions is ‘yes’, then you are in great trouble. While the reasons for the above questions are countless, the result for all the above remains the same – inaccessibility of hard drive data. These problematic situations can be easily surmounted by restoring the data from an updated backup. However, not all computer users have the time to create and maintain a backup. For those users, the only hope of recovering the data is by using an advanced third-party Partition Recovery Software

To illustrate the above case, consider a practical situation where you attempt to start Windows XP based system, but it does not boot. The booting process halts before the Windows logo appears on the screen. However, when you attempt to boot the system using a Windows XP CD, it displays:

“Inf file txtsetup.sif is corrupt or missing, status 32768. Setup cannot continue. Press any key to exit.”

After the above error, the data saved in the Windows XP based hard drive becomes inaccessible.

Cause:

The reasons for occurrence of the error message are:

MBR corruption Hardware failure

Resolution:

To resolve the above error message and to access the data, you need to follow the below measures:

Run “fdisk/mbr” command to resolve the first cause of error. In case of hardware malfunction, change the damaged system component.

However, if the problem still persists, then you need to format your hard drive. The process of formatting deletes the data saved in the hard drive, which can only be recovered by using an effective Partition Recovery Software.

A Partition Recovery tool is a powerful utility that recovers formatted data in very quickly. The recovery applications comprehensively scan the hard drive by using advanced methods and allows you to restore the data from an updated backup.

Stellar Phoenix Windows Data Recovery is a powerful tool that salvages deleted data from a formatted hard drive. With no prior technical knowledge required, the software ensures recovery by even a novice user. Compatible with FAT12, FAT16, FAT32, VFAT, NTFS, and NTFS5 file systems, the Partition Recovery utility supports Windows 7, Vista, XP, 2003, and 2000 operating systems

google news
Continue Reading

Tech

Professional Data

Published

on

By

Without genuine and credible data, executing any inbound B2B marketing campaign is nearly impossible. Most B2B marketing efforts such as emails and webinars heavily rely on well-maintained and updated data to generate new businesses.

Organizations either purchase or rely on in-house customer databases to execute campaigns.

Email marketing and social media marketing play an essential role in generating prospects, increasing subscription rates and registrations. But no matter what method a marketer is employing to execute their campaigns, eventually the key to produce quality leads is a clean and updated customer database.

A database with unclean data and incorrect information can severely impact return on investment while simultaneously affecting ongoing marketing campaigns.

How should a marketer retrieve credible data?

One way to own credible data is to get a licensed customer database from trusted service providers. Data licensing is a service through which a marketer can get access to clean, real-time and correct databases as per their needs and preferences.

Once a marketer renders the service, they become a licensee of a particular portion of data. The time period, however, differs from each service agency.

Due to its validity and reliable customer or prospect insight – which more than emails and contact numbers – industries and companies have no choice but to depend on such services.

Unlike automated lead generation software solutions, outsourced data licensing services actually help marketers to generate targeted leads.

Dependence of B2B marketers on licensed data:

In the general, the size and quality of the internal database can at times lead to poor lead generation. The reliability is perhaps low due to the failure to update the database on a constant basis.

Likewise, through data licensing services, a marketer can buy sets of segmented and validated tailor-made customer databases which help augment the performance of inbound marketing campaigns.

A B2B marketer gets access to an array of services and databases if they opt for data licensing services. Apart from data hygiene maintenance and augmentation, a marketer can gain access to customized mailing lists, blast emails to segmented target groups and also undertake market research activities to gain further understanding of their current clients and customers.

In conclusion, an organization that fails to manage their databases drives its organization success to the nadir. With the ubiquitous presence of competitors in the industry, owning a weak and incomplete database can only bring down the performance and brand image of the company.

Data licensing services on the other hand ensure to act as a catalyst to generate more prospects through validated and credible means. In the end, it is up to the company to either choose or move on with obsolete data generation techniques.

google news
Continue Reading

Tech

Startups for Vets, WordPress, Web Hosting, and Business Online

Published

on

By

Web Hosting Tools, WordPress and Business Startups

Web Hosting Tools for Startups

Female veterans are facing employment challenges as they return home. The unemployment rate for female veterans well surpasses that of their male piers. Rather than waiting for the economy to change, many of our bravest are creating their own opportunities and seeking self-employment as an alternative. And for good reasons. Female veterans of the war in Afghanistan and Iraq are facing challenges when they return home from deployment. So often when we think about vets coming home and looking for employment, we visualize our brave soldiers coming home to a land of opportunity. But that is far from the reality. When vets come home they face a whole series of transitions that vets need to make in order to gain employment.

Many female veterans are single mothers who have a lot to go through all at once. Being a job seeker and also being a Mom can be a difficult challenge. Many female vets have stated that when they transition out of the military, they are not prepared for the income drop that stems from taxes and medical insurance expenses. Before they know it after they transition out of the military, many female vets find themselves homeless and without hope. They are looking for local help for home and food programs, such as Inner Faith, which subsidize the food for themselves and their children.

The competition for jobs against their male counterparts is extreme. Women vets are choosing to gain unpaid internships in order to get their foot in the door. Many times when seeking a job, female vets learn that the job is filled by their male counterparts. Male domination in many industries is prevalent. Women have to mold their schedule and their lives because of their children. There are many challenges. Biases against veterans, biases against women and the challenges that they face for not only getting a job but getting equal pay. Many vets return from deployment physically disabled or face PTS (Post Traumatic Stress) which makes finances a real challenge. Women vets are having to pick and choose which bills they can pay, which results in a lower credit rating. There are a whole series of challenges for women coming back after serving our country.

Getting Green Done with Vets

GCGreen.com is a women owned, native American, service disabled, veteran owned company that was started by a female vet after she returned home and found the employment opportunities for female vets were scarce. The company focuses on providing a growing network of education, training, apprenticeship, and project opportunities for vets looking to work in the energy efficiency and alternative energy systems such as renewable energy. They actively participate in developing and implementing training programs especially those for transitional veterans and for out of work or under-employed veterans attempting to overcome their unique challenges in today’s economy. GCGreen is a company for renewable energy consulting. A woman veteran focuses on veteran training and veteran mentorship in the clean energy industry. As students come out of the classes, GCGreen has employment opportunities for women veterans that are knowledgeable in solar panel installation.

Web Hosting Tools for Creating Your Own Opportunities

GCGreen.com is a website that was created using WordPress, a content management system, that makes creating a website or blog easy. WordPress is available with web hosting plans from reputable hosting firms. With the tools provided from a web hosting firm, people can start their own website and ultimately their own business. There are a lot of employers that do value the military experience, but it is a challenge to find those employers. With an unemployment rate for veterans at 6.8%, while the unemployment rate for female veterans is 15.5%, one can easily see the disadvantages for female vets. These are staggering numbers. These amazing women who went to war are learning that they need to be creative in order to make a living. Building a business during or after deployment is something that is a viable option to a desk job.

Solutions for Female Veterans

Being an entrepreneur is something that could be a practical solution for these women. The U.S. Small Business Administration offers programs for women entrepreneurs who are willing to take the initiative. Capital One, for example, provides events for female veterans who have businesses and allow women veteran business owners to pitch their ideas in front of industry leaders. SBA.gov is the place to start marketing your new business and finding opportunities that would otherwise not be available.

Veteran business owners are able to network through SBA.gov and grow their business with opportunities provided by the Federal Government. SBA has training, networking, and sub-contractor information for small business owners. When signing up with SBA.gov, you will need a Dun & Bradstreet business number, a website address, and documentation that supports your business such as a Incorporation Papers or a Doing Business As (DBA) certificate from your state.

Web Hosting Solutions for Entrepreneurs

There are more than 27 million small businesses across the nation, and it’s a challenging feat to open one after a recession. But with the affordable cost of web hosting, entrepreneurs are able to secure a domain name many times for free, setup a professional website using WordPress, and have a formal e-mail addresses for yourself and any of your employees. In light of constant unemployment news, there is an emerging trend of veterans who brainstorm business ideas they launch in their free time — and grow into a full time job.

google news
Continue Reading

Tech

Linux Dedicated Web Hosting Server

Published

on

By

Dedicated server hosting is a chief requisite for any online website to be set up and sustained. In an age, where the internet has become a basic requirement, there are a large number of operating systems which have their own web hosting programs. The necessity of a dedicated web hosting program cannot be undermined in any way. It not only helps in better management of websites but also, has features which make online operations more smooth sailing. Linux has its own dedicated server hosting platform just like other operating systems. This web hosting program can be employed with those systems run on Linux. Linux is an open source category of operating system which is UNIX based and is compatible with a wide variety of hardware support.

In simple terms, linux dedicated server hosting means the construction of websites on the pattern of the Linux system. Open source technologies like MySQL are compatible with Linux server hosting. The chief advantages of the Linux server hosting are as follows:

Firstly, the costs involved in the Linux web hosting platform are not very high. This dedicated server requires low investment. The hosting price is slashed as Linux charges no fees for license. Secondly, the Linux web hosting offers support for the scripting languages like Perl and PHP. Linux also offers easy transition or conversion to windows operating system. Thirdly, Linux handles website load very well. Fourthly, databases like MySQL and mSQL are supported by Linux dedicated server system. The high range security and dependability, make the Linux dedicated server system a worthwhile investment. Once a Linux server is accessed, users generally do not switch over to some other operating system web host. Of late, there have been a huge number of web applications that have infiltrated the web world. These programs, are, at times not supported by Linux. In order to gain access to such features, some users are switching over to Windows server dedicated system. Let us take a quick look into the disavantages of the Linux dedicated sever hosting platform.

The main problem of the Linux server to comply itself with Windows based application has been its biggest shortcoming. Modules or file extensions do not work with Linux at all. These are features typically restricted to Windows server hosting. This renders the Linux web hosting system to remain inoperative when a windows website is tried to be converted to the Linux module. Linux hosting has its own benefits but fail to match up with the easy to use interface and user friendly design of a windows server hosting platform.ASP scripts do not work on Linux web hosting systems.

google news
Continue Reading

Tech

3 Secret Quibids Strategies You Never Knew About

Published

on

By

Most Quibids strategies that are present online seem to talk about the obvious – trying to bid at the last moment before the clock runs down or trying to buy win voucher bids first. These strategies all work but one should always understand the limitations of such advice. Quibids strategy varies according to the auction. If you are planning to win a 15 bid Quibids voucher, the Quibids strategy is completely different as compared to if you want to win a Quids Macbook or iPad.

Before you start bidding on Quibids or indeed any other penny auction, you should know and understand how these auctions work and how they differ from ordinary auctions. I would like to emphasize that at penny auctions like Quibids you can lose money without winning anything – something that cannot happen at say eBay. Therefore you should invest money in Quibids only if you understand the risk.

Now that you are ready to start bidding, here is a list of Quibids strategies that will help you win some great Quibids auctions. Follow these instructions as they form the best Quibids strategy you’ll find.

Quibids Strategy-1: Aggressive Can be Good

Look at most Quibids auctions during high traffic times and follow them for some time without bidding. See who wins the auctions. More likely than not, it is the aggressive bidder who wins. This is especially true for smaller items like Quibids bid vouchers and other cheaper and unconventional items. Why is this? The popular thought seems to be that you should wait till the end to bid and not waste bids by being aggressive.

Here’s why – this Quibids strategy plays right to the heart and mind of a penny auction bidder. The psychology of bidding dictates that new bidders can easily be intimidated online by aggressive bidders. If someone sees that he is being outbid each and every time as soon as he places the bid, he loses hope. At this stage, he wants to protect his remaining bids and thus quietly exits the bidding arena. What has actually happened is that the aggressive bidder, even though he had to spend a few more bids, actually ended up winning and the meek bidder simply lost a few bids and actually ended up losing money.

The trick is simple: the only way to make a net profit on Quibids is by winning the item at all costs. Therefore if you can bid aggressively and come out on top, this is much better than being meek and ending up losing the auction.

Quibids Strategy-2: Bid Vouchers can be Bad

I know what you are thinking – if bid vouchers get you extra bids, how can they be bad? Well the usual reasoning is that if you spend 15 bids to win a 25 bid voucher, effectively you have made 10 extra bids. However, this is faulty logic because voucher bids do not count towards the Buy it Now feature of Quibids. Therefore what you are effectively doing is exchanging 15 refundable bids for 25 non-refundable bids that cannot even be used to buy the item at the market price.

The reason you need to preserve the Buy it Now feature for the bids is to minimize the losses. Quibids and other penny auctions can be very risky and you can end up losing a lot of money if you are not careful. The buy it now feature essentially removes this element of risk if you use it correctly, which can be a huge bonus.

Quibids Strategy-3: Know the Time to Bid

I cannot overemphasize the importance of this Quibids strategy. Essentially, whatever other strategy you use, you might fail to win a Quibids auction if you do not follow the right times to bid. There are certain times that are very busy and certain times that are not. However, this is not the only criteria. Sometimes there are only a few people bidding but there are very few auctions as well, so the competition is immense.

Therefore, the key is competition. You need to bid at the time when there are plenty of auctions and not as many people. This is the best time to bid on Quibids. The worst time to bid on Quibids would be when there are too few auctions and too many bidders. Avoiding high competition can get you some amazing deals.

google news
Continue Reading

Trending