Connect with us

Home Improvement

Cleaning Your Curio Cabinet the Right and Proper Way

Published

on

A high-end wooden product requires constant caring as a result you should clean your furniture frequently. Most wood furniture, especially curio cabinets are described by its natural markings, colors, and character of the grain. This is what makes wood furniture so exceptional and gorgeous. To maintain the wood looking beautiful it is significant that you maintain the temperature within your home at a temperate moisture level.

These cabinets frequently store our most treasured possessions and artifacts. The appropriate cleaning and protection of your curio cabinet need not be a time-consuming or complex chore. Dust is the biggest causes in making a curio cabinet look messy. Containing the great dust beast will make sure a clean curio cabinet.

Things You Should Have:

  • Furniture dusting polish spray
  • Clean dusting cloth
  • Glass cleaner
  • Paper towels

Primary thing you should do is to get rid of objects from the curio cabinet, or if you have a lot of time, you can clean around the objects.

The next step is to spray furniture dusting polish onto a clean dusting cloth. When cleaning the wood, you must be certain to make use of only approved dusting agents for oak wood. Making use of a good non-silicone or non-wax agent is recommended. This will not only get rid of dust from your oak curio, but also eradicate fingerprints as well. The cloth should be of the micro-fiber kind. This will assist in dusting, as well as polish and clean the wood at the same time.

The third step is even if you do not make use of a micro-fiber cloth, you should utilize a cloth that is lint-free, soft, and clean. Make certain that you totally dry the wood after dusting as moisture can harm the oak curio cabinet.

The next step is to wipe the wood of the curio cabinet; you must begin in the inside of the cabinet, with the dusting cloth. If you decide not to get rid of your objects, move them aside or lift them as you dust under and around them. Wipe in a gentle, rubbing motion, using more furniture spray if needed.

The fifth step is to polish the outside wood of the cabinet by rubbing in a rounded motion with the dusting cloth and furniture dusting polish spray. Maintain the wood moistened with the spray so the cloth glides over the wood with no abrasiveness.

The next step is to spray window cleaner onto the glass doors (and glass shelves if your curio has them) and make use of the paper towels to wipe, in a rounded motion, the inside and the outside of the glass.

The last step is to dry the glass with fresh paper towels, wiping the glass in a back and forth movement. Confirm to make certain all of the wood is dust-free and all of the glass is free of smudges and fingerprints before putting your cleaning products away. Throw away the used paper towels.

Maintaining curio clean and protected will make certain its high quality look for many, many years to come.

google news

Home Improvement

How To Measure For New Windows

Published

on

By

It is important to measure properly for replacement windows to get an accurate price and for ordering the right size windows. If you order them too small, you will have to be creative when fitting and are likely to have problems. If you order them too big, you’re really in trouble.

Measuring correctly may be very daunting, but in reality it’s actually quite simple for most window types. All windows are measured from the outside of the house. When you order your windows, always give the dimensions as width x height. In the double glazing industry it is widely accepted that the width of a frame is always stated before the height, so stick to this convention or you might cause confusion.

Flat windows

If you have old wooden windows you want to replace either with modern ones or uPVC windows, measure the width first and then the height. To establish the width take three measurements. This is very straightforward. First measure from the top right corner to the top left corner, brick to brick. Then measure in the same way from left to right at the midway point right above where the window locks, and finally measure at the bottom.

If your house is rendered or covered in pebble-dash, it is advisable to chip away some of the material to reveal the brick. For houses with cladding ease away the cladding to find the outer edge of the frame to take accurate measurements.

When you measure, you will probably discover that all your measurements are slightly different. This is quite normal as brickwork is often uneven. It is not a reflection of your measuring skills! Deduct 10mm from the smallest measurement to allow for sealing and clearance tolerances. This is your width.

Measuring the height is not quite so easy, and how you go about it will depend on whether your window has a windowsill or not. If it does, measure from the top of your existing window frame or the head drip to the bottom of the sill. The manufacturer will deduct the sill from the overall height.

Again take three measurements, one on the left, one in the middle and one on the right. If your current window does not have a sill but sits on a concrete sill, the replacement window can be made either without a sill or with a sub-sill. As before, take the smallest measurement and deduct 10mm if your window sits on a concrete sill, otherwise just 5 mm. This is your height.

If you have existing uPVC windows that need replacing with new ones, you need to measure the thickness of your existing units in addition to the width and the height. This is because, if the thickness of the new units is greater or smaller than that of the originals, the new units cannot be easily fitted. The height and width can be measured by removing the glazing bars which may be fitted on the outside for externally glazed, or on the inside of the window pane for internally glazed windows.

Curved windows

Whereas everyone can measure easily for flat windows following the steps above, measuring for curved or rectangular bay windows requires more skill and experience. Ideally these should be measured by experienced surveyors before you order. If you want to measure to get a quote, however, follow the steps below which are a simplified way of measuring.

Measuring for bay windows follows the same principles as for flat windows. A bay window is measured as a series of flat windows and you have to measure the width and height of each part of the bay window. The height will be the same on all.

For the installation of a new or replacement of an existing bow window, measure the width and height and specify the number of facets. Only the overall width of the opening is required for a bow window, as the facets will be sized equally.

Measuring for replacement windows is not difficult, and if you follow the steps outlined above, you will always achieve accurate results.

google news
Continue Reading

Home Improvement

No Streak Window Cleaning

Published

on

By

If you want to brighten up a room or your entire home, there is no less expensive way than to have clean windows. However, getting the windows to look good with no streaks can be a problem. Clean windows let in more light and brighten any room but a streaky window can be more of a negative than a positive.

Follow these simple tips for window cleaning no streak solutions.

The first tip is to never use paper towels or cloths of any kind on windows. Paper towels leave small particles on the glass and cloth will leave lint behind. Either of these solutions will leave unsightly streaks on the windows. A better solution is to use coffee filters. They fit the hand, are absorbent and don’t leave lint.

You should use the right tools for window cleaning no streak solutions such as a squeegee or scrubber. The proper tools will have your windows looking like a professional window cleaner did them for you.

A scrubber is padded and used for cleaning or scrubbing the dirt away. A squeegee is a long metal “blade” with a rubber edge, somewhat similar to a window wiper. You could replace a scrubber with a regular, cleaning sponge if you don’t have a scrubber—it works just as well. Window cleaners will work well, but be sure that those cleaners have vinegar in the ingredients. Commercial window cleaners often leave a waxy film on the window. Vinegar and water works very well if no waxy film is present but if you’ve used commercial cleaners in the past, it’s a good idea to add ½ teaspoon of liquid dish soap to the window cleaning solution to remove the film. Just using vinegar and water on a window with a film will leave the window streaky.

Vinegar and water is very environmentally friendly to clean windows. If dish soap is added on the first cleaning after using a commercial cleaner, it’s only necessary the first time and in such a small amount that its impact on the environment is minimal.

For a really streak free clean just crumple up newspapers to use instead of paper towels or a cloth of any kind to wipe away excess water and cleaning fluid.

Another great tip for window cleaning is to clean on a cloudy day. If the day is extremely hot or the window is in direct sunlight the windows will dry any solution you are using too quickly. Drying too quickly will leave streaks or water spots, which aren’t desirable.

google news
Continue Reading

Home Improvement

Garage Doors Are the Focal Point of Most Homes

Published

on

By

When someone drives down your street and takes a look at your home, it’s likely they will notice your garage door. After all, it may take up as much as one third of the facade of the house, so it can be a real focal point, good or bad. No matter what your home looks like, if the overhead door is old and shabby, people are going to get the impression that the entire property is rundown. So much for curb appeal! If you decide you want to replace your existing door with a new one that’s going to enhance your house, you will have a number of different styles to choose from. You will want to pick something that is going to look good with the overall look.

You need to do a little preliminary work before you’ll be ready to have a new door installed. You have to take the measurements of your current door or its opening in order to determine if you’ll be able to use a standard-sized replacement or if you’ll have to have your new door custom made. You also have to decide the type of material you’d like the door to be made of with steel being the most durable and wood having the most pleasing aesthetic value. Of course, the amount you can afford to spend will dictate the style, material, and extras, like decorations or windows, that you will be able to purchase. Basic door styles include:

1. Most American housing styles look good with traditional doors. These include ranch homes, colonials, Victorians, Cape Cods, and Craftsman styles. A traditional door will also be appropriate on many European-styled homes, such as Mediterranean, Tudor, French Country, and Spanish.

2. Contemporary doors will only look right on homes that also have contemporary styling. If your home was built with high-tech materials and clean lines, then a contemporary door will fit the styling like a glove. These doors often include tempered-glass windows which may be tinted, frosted, or clear and come with door frames that are wrapped in aluminum which require less maintenance.

3. Carriage doors are based on the doors that used to be found on carriage houses back before the era of cars. These doors often swing open, but if you are short on space, you can find models that fold back even though they look like swing doors. Although carriage doors seem like they would look best on older homes, they actually look perfect with many traditionally-styled houses.

4. Many doors you will find have raised panels which add depth and interest to the front of your home. In recent decades, this style of door has become the standard for most American homes. Because of this, they are available in a wide selection of materials and with a number of different options.

google news
Continue Reading

Trending