Connect with us

Tech

10 Tips for Opening Your Own Dance or Ballet Studio

Published

on

As the owner of a brand new dance school, the process of putting together all the required equipment for dance and ballet studios is still very fresh in my mind. The following is a list of what is needed in each dance studio:

1) Marley or other vinyl floor covering. This is the preferred dance surface for ballet, modern/jazz, and tap instruction. There are several manufacturers of vinyl dance flooring products. Most come in 5-6′ wide rolls in lengths up to about 100′. Marley is usually rolled onto a hardwood floor and “floats” on the floor without any adhesive other than special vinyl tape used on seams and edges. Since the marley is not permanently affixed to the floor, it can be rolled up if needed for a performance in another venue. One important thing to note is that rosin cannot be used by ballet dancers on marley – the rosin damages the vinyl surface and is very difficult to remove.

2) Sound system for CDs and/or Bluetooth connection to a iPhone/Android device. It is essential to have a sound system with a remote control so the instructor can easily repeat sections of music as needed.

3) Barres, either wall mounted or standalone. Please refer to the section on barre construction below for more detailed information.

4) Wall Mirrors. Mirrors should be mounted on at least one wall (preferably two adjoining walls). They should start as close to the floor as possible, but even young dancers can see their feet from anywhere in the studio as long as the bottom of the mirror is lower than about 15 inches from the floor. The top of mirrors should be 6′ minimum from the floor.

5) A small table for instructor’s notebook or other instructional materials can also be used for the sound system.

6) Large wall clock. Dancers and instructors need to know class start and end times.

Ballet Barres – Build or Buy?

One of the most important pieces of equipment in a ballet school is the barre. There are many commercially available ballet barres, but in the end we decided to make our own barres for the following reasons:

7) Commercially available barres are expensive. Typically, a professional grade 12′ barre costs between $400-$1000 for a free-standing model, and between $300-$600 for a wall mounted version.

8) Our experience with commercially available free standing barres is that even the highest quality models eventually have failures at the connection points.

9) We wanted barres that were absolutely rock solid and would last for many years. We believe that most commercial free-standing barres are too lightweight and “flimsy”.

10) We wanted a barre system that was flexible enough to meet the needs of our school’s schedule of ballet classes for many age ranges as well as modern, jazz, and tap classes.

In order to give our school the maximum flexibility in our class schedule, we decided to build two free standing 12 foot barres for each of our two dance studios. We chose free standing barres so we could (1) have dancers on both sides of the barre and (2) orient the barres as either a single 24′ span or two parallel 12′ spans. Since (unlike commercial barres) we have no need to dismantle the barres for shipping, we decided to eliminate joints (and hence the possibility of joint failures) by using steel tubes and welding the joints.

The exact specifications of the barres are as follows:

– Tubing material is schedule 40 1 ½ inch steel black pipe. This pipe has an outside diameter of 1.9″. The use of 1.9″ diameter tubing (a) makes welds much stronger and (b) is very comfortable to grip

– The top of the barre is 12′ long and is 42″ above the floor.

– The legs of the barre are an inverted “T” with the “feet” (i.e. the part of the leg that lays flat on the floor) being 2′ long.

– The top of the barre overhangs the legs by 18″ on either side. This allows for easy moving of the barre.

– We decided to have a lower barre welded between the legs at a height of 32″ for our younger dancers.

Schedule 40 pipe is available at most steel suppliers (search “steel pipe cityname”). The pipe comes in 21′ lengths, and the steel vendor will usually make one cut per pipe at no additional cost. I had the pipes cut into 12′ and 9′ lengths to minimize waste.

Our welder had no trouble fabricating the barres. Included in the fabrication was thorough de-burring of all exposed ends. The result is a smooth, rounded edge that does not require any type of end cap.

After our welder completed the barres I purchased rubber feet (1.5″ diameter and 1″ thick) and bolted them to the ends of the “feet” of the barre. This has worked extremely well in eliminating damage to the marley in our studios.

To finish the barres, I first sanded the surfaces with 180 grit sandpaper to smooth out the horizontal gripping surfaces and prep for painting. I then sprayed with textured black paint. Three coats resulted in a beautiful finish that resembles powder coating at a fraction of the price.

Dancer response to the barres has been uniformly excellent. Though heavy (they weigh about 60 lbs each) two young dancers have no trouble moving them into the center and back up against the walls when needed. We have had no issues with the fixed heights of the barres.

Total cost for 4 barres was about $450 in materials and $400 for welding services, for a total cost of $850, or $212 per barre.

google news

Tech

Are Loaded Longboards Right for Me?

Published

on

By

Although the longboard style of skateboarding has been popular for quite some time Loaded longboards are an enticing possibility for riders who have moved beyond the beginner level, and have started to learn about features that are most advantageous for their type of longboard riding.

Types of Loaded Longboards to Consider

The company is based in California and currently has six skateboard models to choose from. Some of the differences between the models include the overall length, and the size of the wheelbase. The boards are also designed with eye-catching patterns so riders can glide in style.

All of the boards are built for high-performance, but some have features that cater to specific types of riding or environments.

For example, some skateboarders prefer to spend most of their time at nearby skate parks. These areas feature large pavement spaces and hills that are perfect for achieving impressive speeds. Another advantage of skate parks is that they allow people to share tips and get encouragement from other riders. The skateboarding community is generally very close-knit and supportive of each other’s efforts. People who want to ride Loaded longboards at a skate park might prefer the Fattail model. It’s perfect for paved areas and parking garages, and also has a large tail to promote quick turning ability.

Alternatively Loaded longboards that focus on the freestyle discipline have shorter wheelbases for extra responsiveness while performing tricks and staying secure through tight turns.

Purchasing Loaded Longboards

Understandably, the cost of longboards is of great concern to many riders, especially if their income is limited. As with most other types of investments, it’s well worthwhile to consider the personal significance of the purchase, and also consider how the enjoyment of the skateboard continues over time, especially as a rider’s skills develop.

Also, keep in mind that the ultimate cost will depend on which Loaded model riders choose, and whether they wish to make their own customizations to the board after buying it.

To aid in the purchasing process of your own Loaded longboards, start by making a list of certain characteristics that are most important. Then, do research to see which model of longboard offers all or most of those features. Whether you’re looking for a commuter board, or a compact deck, Loaded has a model to suit your needs.

If you need help, consider asking your chosen retailer about the most commonly selected model among other riders who also perform your favourite discipline. Although the board types look similar at first, they’re designed with features that excel for certain needs.

Even though a methodical purchasing process takes more time and effort overall, it will help you get a board that’s more fun to ride, and can bring years of satisfaction.

google news
Continue Reading

Tech

Inspirational Quotes for the Disheartened Soul

Published

on

By

You sometimes hurdle times where in you feel extremely down that you just want someone to throw you some inspirational quotes. Here are some selection of inspirational quotes and ways to apply it in real life.

1. Yesterday is history. Tomorrow is a mystery. Today is a gift. That is why we call it the present. – Babatunde Olatunji

Most people, they set their future goals too high that it is almost impossible to reach it at a realistic timeframe. Stop complaining about the past. No matter what you do, time will never rewind itself on that day you made a mistake. So cherish the moment now. Who knows, you may regret the time that you never took a chance to ride that roller coaster when you still can.

2. Do not let what you cannot do stop you from doing what you can do. – John Wooden

This inspirational quote tells us that everyone has a weakness but that does not mean you do not have strength. You must be good at something and that is what you should cultivate.

3. Our greatest glory is not in never falling, but in rising every time we fall. – Confucius

This inspirational quote says that the heart of a champion always pursues his goals. That is why when they reach their aim, they often reap the sweetest glory for the reason that they rose after the fall.

4. To live is the rarest thing in the world. Most people exist, that is all. – Oscar Wilde

True indeed, most people are solely on earth for mere extinction. The bible even tells us that we should do things in the name of the Lord. At the start of the day you should say, “I dedicate my work to you, oh Lord.” That way, you do not just exist, you are living. One distinction between living and existing is HAVING A PURPOSE.

5. The only man who never makes a mistake is the man who never does anything. – Theodore Roosevelt

Of course, how can you achieve something if you do not act on it? You are a human being, not a thing who does not move or breathe.

6. Blessed are those who can give without remembering and take without forgetting. – Elizabeth Bibesco

This inspirational quote tells us that when we give or share something, we oftentimes expect something in return. But it is indeed always better to give than to receive. You may not be compensated here on earth, but God will not forget that good deed you just made.

7. If you want to be happy, be. -Leo Tolstoy

Most people wallow in sadness because they choose to. If your lover left you for another person, why mourn over them. There are more than 6 Billion people around the world and one of them can appreciate you even more and will be afraid of losing you. So choose to be happy instead.

8. Never tell me the sky is the limit when there are footprints on the moon. -Anonymous

This is the real world and as crazy as it is, you are only limited by how far you think you can achieve. So do not stop achieving your dreams.

9. Everything is okay in the end, if it is not ok, then it is not the end. -Anonymous

This is one of the inspirational quotes that tell us not to give up. Challenges are already part of life what you need to do is keep going until everything falls into the right place.

google news
Continue Reading

Tech

The Different Types of Modern Ferry

Published

on

By

The simple task of carrying passengers and sometimes cargo across a body of water might not seem that remarkable, but it is something that dates back centuries. There are various writings and published works from ancient times that suggest the profession of a ferryman was a crucial aspect of former cultures and civilisations.

Today, ferryboats remain an essential means of transport all over the world. In several waterside cities and destinations, these vessels form part of the public transport system, providing the means to travel over water without the use of a bridge or tunnel.

What’s more, ferries are also commonplace in larger seas or oceans, connecting countries and even continents. Although the manufacturing and construction of these colossal vessels is staggering, each and every component, no matter how tiny they may be, can be crucial. Therefore, we like to think our range of high quality products, from BSP adaptors to NPT fittings, might come in handy.

But what is the history of the ferry? How many different types of vessel are there? And what are the biggest ferries and busiest routes in the world?

History of the ferry

In Greek mythology, Charon was the ferryman of Hades, who carried newly deceased souls across the rivers Styx and Acheron, which separated the worlds of the living and the dead. You still had to pay a fare to Charon though, usually a coin placed in or on the mouth of a dead person. In the days before steam and diesel, this ferryman’s chosen method of propulsion was a long pole held in his right hand, while receiving the deceased with his left.

In Anonymus De Rebus Bellicis, a piece of 4th century Roman literature, there is speculation that a pair of oxen once propelled a ferry. This principle could theoretically work, especially when you consider Kevin J. Crimson’s booked entitled When Horses Walked on Water: Horse-Powered Ferries in Nineteenth-Century America.

But the first steam-powered ferry was said to be the Juliana, invented by John Stevens. It began operating on 11th October 1811 between New York City and Hoboken, New Jersey. However with the advent of diesel engines in 20th century, steam-powered ferryboats have become a rarity and are reserved for special occasions or tourist routes.

While the majority of modern ferries still use diesel as their primary fuel source, the shipping industry is constantly looking at cleaner alternatives, which won’t damage the environment as much. Studies have found that vessels running on Liquefied Natural Gas are slightly more efficient, while electric and hybrid alternatives have also been developed in recent years.

Types of modern ferry

Despite the fact there are several different types of ferry in operation today, each one usually shares certain characteristics. However, the length of the route, the passenger or vehicle capacity, speed restrictions or requirements and the weather conditions will determine what ferry is used at a particular location.

Double-ended

The front and back of this kind of ferry, known as the prow bow and stern, are interchangeable. Therefore, they can travel back and forth between two ports of call without having to turn around. While this saves a great deal of time, it is sometimes absolutely necessary due to the size and area restrictions of certain terminals.

Famous double-ended vessels include the Staten Island Ferry, Washing State Ferries, Star Ferry and numerous boats on the North Carolina Ferry System and the Lake Champlain Transportation Company. There are also double-ended ferryboats in operation in the Norwegian fjords, British Columbia and Sydney, Australia.

Hydrofoils

Even though hydrofoil ferries might seem like a fairly advanced concept, prototypes date back over 100 years. Essentially, a hydrofoil is a boat that initially floats on the surface, but when velocity is increased the hull lifts out of the water, decreasing drag and allowing for greater speeds. The benefit of this type of vessel is that passengers can be transported quickly while minimising fuel costs. For this reason, they are commonplace on the English Channel and compete against Eurostar trains that use the tunnel.

However, they have their disadvantages too. Due to their technically complex nature, they are expensive to build and require ongoing maintenance. What’s more, a hydrofoil’s sharp edges that reside in the water during operation can also injure or kill marine mammals such as whales.

Hovercrafts

The development of the modern hovercraft is typically attributed to British mechanical engineer Sir Christopher Cockerell. In the 1950s, he developed a seagoing vehicle that used blowers to produce a large volume of air below the hull. The difference in air pressure above and below the hull generates lift and allows a hovercraft to float above the water surface.

Due to their adaptability and cost-effectiveness, they soon became a commercial success, predominantly around the UK and in the English Channel. Before long, hovercrafts were also adopted by the military and even used for recreational purposes.

But just like hydrofoils, they require a great deal of maintenance and can be susceptible to damage from adverse weather conditions. On top of that, hovercrafts are constrained to a given payload and their sea keeping ability is dependent on size.

Catamarans

These ferries feature two parallel hulls of equal size, which are geometry-stabilised. Due to their lightweight nature, thin hulls that reduce drag and no ballasted keel, a catamaran has a shallow draught and can travel at fast speeds. They also heel much less than a monohull, allowing for a more comfortable and efficient ride.

Traditionally, they relied on the wind for power and their sails would spill less than alternatives. But modern-day catamaran ferries combine the features of a motor yacht with the characteristics of a multihull.

Due to their countless advantages, catamarans are the ferry of choice for several high-speed services. They can replicate the speeds of a hydrofoil without suffering the effects of strong waves or foul water.

Roll-on/roll-off

Mainly used to transport wheeled cargo such as automobiles, trucks and trailers, roll-on/roll-off ships have built-in ramps that allow vehicles to effortlessly embark. When the vessel reaches its destination, the cargo can exit the other end just as easily.

In the past, vehicles had to be specially prepared before being hoisted into a ship’s hold, which was a time-consuming and expensive exercise. On top of that, the cargo was subject to damage as well. But in 1849, Thomas Bouch came up with the idea of a train ferry featuring an efficient roll-on, roll-off mechanism to maximise efficiency.

While these were used extensively in World War I, purpose-built landings ships capable of carrying military vehicles were developed for World War II. Today, they are still widely used for passenger and commercial purposes.

Cruiseferry

The combination of a cruise ship and a ‘Ro-Pax ferry’, this kind of vessel is typically used by holidaymakers on seagoing vacations or simply as a means of transportation. They are like a cruise ship in that they have numerous on-board facilities such as restaurants, bars and even entertainment or accommodation. RoPax ferries are those with a large garage intake and substantial passenger capacity.

Cruiseferries are typically found across Europe in the Baltic Sea, North Sea, Irish Sea, English Channel and Mediterranean. However, they also operate between China and Australia.

Pontoon ferry

Not the most advanced or modern vessels in the western world, but pontoon ferries are widely used in less-developed countries. Due to their inexpensive yet versatile nature, pontoon ferries are often used to carry people and vehicles across large rivers or lakes where the cost of a bridge is too expensive.

The most common pontoon ferries borrow design ideas from a catamaran. But instead of featuring two narrow hulls, they usually have pontoons either side of the platform or raft. Ramps will be installed on either side of the vessel to increase the efficiency of passengers and vehicles getting on and off.

Cable ferry

Also known as a chain ferry, swing ferry, floating bridge or punt, this type of vessel is guided and often propelled across the water by cables connected to both shores. Traditionally, rope or steel chains were used, but by the late 19th century, more stronger and durable wire cable became commonplace.

A reaction ferry uses the power of the river to tack across the current whereas a powered ferry has an engine or electric motor to wind itself along. Cogs or drums on-board pull the vessel, but the cables or chains have a fair amount of slack, as they have to sink below the surface and allow the vessel to pass.

Fast-disappearing hand-operated ferries are also still in existence, such as the Stratford-upon-Avon Chain Ferry in the UK and the Saugatuck Chain Ferry in Michigan, USA.

Modern ferry facts and figures

World’s largest car ferry in service – The MS Ulysses, operated by Irish Ferries between Ireland and Wales. Launched in March 2011, this vessel stands 12 decks high, but six are specifically designated for vehicles. In total, the Ulysses can carry 1,342 cars and 240 trucks.

World’s largest passenger ferry in service – The Stena Hollandica and Britannica, operated by Stena Line between the Netherlands and Great Britain. This ship features 1376 beds, 538 cabins, an on-board cinema, lounge, bar, buffet and a la carte restaurants, a sun deck and free Wi-Fi throughout.

World’s fastest car ferry in service – The Luciano Federico L, operated by Buquebus between Montevideo, Uruguay and Buenos Aires, Argentina. Capable of a maximum speed achieved in sea trials of 60.2 knots, it holds a Guinness World Record. The boat can also carry 450 passengers and 52 cars along this 110-nautical mile route.

Oldest ferry service in continuous operation – The Mersey Ferry between Liverpool and Birkenhead or the Rocky Hill to Glastonbury Ferry. This is a contentious record, as a couple of different ferries claim to be the oldest service still operating today. In 1150, monks from the Benedictine Priory in Birkenhead used to charge a small fee to row passengers across the Mersey Estuary. However, there may have been a break in service following the dissolution of the monasteries. The ferry between Rocky Hill and Glastonbury, Connecticut, which has been running ever since 1655, only stops operating when the winter freezes over in winter.

World’s largest ferry system – On Scotland’s west coast, Caledonian MacBrayne operate a fleet of 29 vessels, which call at 50 different ports. Elsewhere is the world, BC Ferries in British Columbia have 36 ships that visit 47 terminals, while Washington State Ferries own 28 boats, which go to 20 destinations around Puget Sound.

Even though jumbo jets and high-speed trains have replaced ferryboat routes in some areas, they remain an incredibly important and crucial means of transportation for millions of people worldwide. The most modern vessels are also incredibly quick, very efficient and can transport scores of passengers in comfort and style.

google news
Continue Reading

Trending