There are certain things in electronics that are needed irrespective of age and time. They are required to run the system smoothly without any issues or problems. Switching devices is one such thing that is very important and runs the lights and other items of the house.

These days smart homes are changing to things that are easy to use and are efficient too. For their homes, they are now going for smart switches and different types of sockets that are available too. Here are steps to install smart switches at your house:

1. Turn Off The Power
Before you buy a smart light switch, you’ll need to figure out the type of switch you need for your house. You need to figure out if you only have room for single-control or more too. Also, check the type of wiring you have.

Turn off the power at the fuse box before you start anything at all. After this, unscrew the screws on the actual light switch and then slowly pull the switch forward. Then after this, open up the existing button where you want to install your smart switch and examine what it is like and all the wiring there.

2. Choose A Smart Light Switch
Once you are more familiar with the setting and the placement, make sure you choose a smart light switch that fits your situation. Read on the instructions given clearly to know what control goes the best for that area or home.

There are so many different options and spacings available in the market, making it confusing to pick the right one. Go for the more recommended one and the one that will last you a long time and make your work easy.

3. Remove Your Old Switch
Disconnect the old light switch completely by disconnecting each wire one by one and do it carefully with dry hands. Please note which wire is where and how it’s placed as you disconnect them to avoid confusion later.

If you are confused by the process, make sure you put labels and grab some different electrical tape colors to clear your confusion.

4. Connection
Connect the wires on your smart light switch to the wires inside your wall properly and check if you have secured it well. Connect the wire inside with the right one and the out wire to the out wire and the ground ones with the ground and the rest too.

Secure all your connections well with the help of wire connectors and such things that ensure tight security and ensure no loose or exposed wires are kept there.

5. Check-Up
Once you’ve finished putting all the wires into the box, screw the smart light switch into a place where it belongs. Switch it on, see if the breaker box power is fine, check all connections properly, and start setting up your app.

Finally, then connect your smart light switch to your specific network that is there at home. To do this, first, you need to download the smart light app and connect that to your Wi-Fi.

Check Legrand for some high-quality electrical goods that will make your basic home a smart one. They also have other things, from circuit breakers to switching devices.