Connect with us

Home Improvement

Using Home Maintenance to Increase Your Home’s Resale Value, Comfort Level and Safety



Did you know that home maintenance carries with it five major benefits to you, the homeowner? They are:

  • Enhanced home value
  • Money savings
  • Improved safety
  • Increased comfort
  • Energy efficiency

Considering the benefits, home maintenance is definitely worth doing on a regular basis. Failing to do regular home maintenance can lead to illness, injury and even death (carbon monoxide poisoning is one example). A few of the important areas you need to maintain are:

  • Windows and doors that allow drafts in
  • Subfloors that are becoming spongy
  • A furnace that may be producing dangerous levels of carbon monoxide
  • An air conditioning system that will probably fail in the heat of summer
  • Smoke detectors with dead batteries

Your home can be a much safer place for you and your family if you will adopt a simple home maintenance plan. For example, changing a smoke detecter battery could save your life or the lives of your loved ones, and only takes five minutes. So, as you can see, doing a few simple fixes on some things and inspecting a few others, on a regular basis, can pay huge dividends.

Your house is a comfortable place to live because of the systems that are built into it. You may not have thought of it that way before, or you may have taken the systems in your home for granted, but either way, sooner or later, one or more of them will break down; resulting in, at best, a lot of discomfort or, at worst, tragedy; home maintenance can prevent that breakdown.

For example, your home has incorporated into it an electrical system that powers lights, refrigerator, microwave, water heater, your washer/dryer and many other appliances. You may not think about this system each time you flip on the light switch, take milk from the refrigerator or do a load of laundry, but you’ll soon find yourself without these things and a lot more, if your electrical system breaks down. Most likely it will happen when you can least afford it, too.

Many of these systems have moving parts like motors, belts and gears that make them subject to a lot of wear and tear over a period of time. Some are simply made of materials that naturally degrade over time or are subject to attack by insects or mold. In any case, you can avoid the major inconvenience that can result from such a breakdown, by adopting a schedule of simple maintenance.

Whether your home is an investment, a place to live or both, chances are it’s the biggest single expense of your lifetime. If you bought the home as an investment, in the hope of making some money on it when you sell, then it makes good sense and pays big dividends to keep it in great shape. That way it will keep you safe and comfortable while you live in it and will fetch a good price if you sell.

Real estate professionals have a phrase that applies to a well maintained home: curb appeal. A home’s value is affected by its outward appearance and that’s what the phrase ‘curb appeal’ refers to. The value of your home is going to be higher if the roof is well cared for, the doors and windows are tight, and the landscaping is neat, because potential buyers will find it more appealing, so you’ll likely get a higher price than if it were otherwise.

However, you’ll need to maintain your home, even if you don’t plan to sell, just to maintain your original investment.  Even as simple a task as replacing the filter in your furnace can yield big dividends, when it comes to keeping the value of your home high. It’s simple to see why this is true. When the filter is clogged, the motor must work harder to push air through it, straining the fan belt, bearings and other components, causing the life of the fan to be shortened, necessitating the replacement of the entire fan assembly. There’s a big difference between a $2.00 filter and a $500 repair charge.

So as you can see, it’s much less expensive, in the long run, to maintain, than it is to repair when things break down.  The first thing to do is to identify those parts of your home that require regular maintenance and make a list.  Inspect each of them periodically and make repairs where needed. When buying materials, buy the best you can afford.

This will ensure maximum benefit and you’ll find you make repairs less often, so you’ll save money in the long run and you’ll be protected from inconvenience and even disaster.

Here are just a few things you need to check each year:

  • Gutters and downspouts
  • Window trim and door frames
  • Sprinkler timer batteries
  • Furnace
  • Air conditioner
  • Chimney spark arrestor
  • Water heater anode and dip tube
  • Water heater burners, tank and flue
  • Fireplace and chimney
  • Refrigerator condenser coils (vacuum)
  • Smoke alarms and CO2 detectors
  • Indoor gas line connections

These are just a few of the many items you’ll need to inspect on a yearly or, in some cases, monthly basis. There are many more areas you need to inspect and repair but they are beyond the scope of this article. So, as you can see, you have a lot of work to do; and there’s no time like the present. Good luck. For more information, go online and search for home maintenance or check your local library.

google news

Home Improvement

What are the Technology Used in Solar Photovoltaic



photovoltaic technology 1

The solar panel market is a growing and ever expanding market concept. The idea of getting off of addicting fossil fuels and going green and making energy efficient choices is starting to drive the world of tomorrow. Energy efficient machines, ever lessening gas mileage on cars, lower emission requirements, and more recycling than ever before are signs that the world is trying to change the way it thinks about energy consumption and conservation.

Two technologies that are currently used to harvest solar energy are the solar photovoltaic and solar thermal methods. Basically, solar photovoltaic technology (PV) involves the conversion of solar rays into electricity, which can then be fed into a grid or used separately to power lighting, heating and air conditioning systems as well as all the home appliances. Solar thermal technology, on the other hand, harnesses sunlight directly to produce solar power, which enables appliances such as solar cookers and water heaters to function without conventional electricity.

What is a Photovoltaic Technology? 

The best solar panels technology uses arrays of solar cells to receive sunlight and convert the same into electricity. A solar cell is basically a fine silicon wafer. PV solar panels comes in poly crystalline , mono crystalline, amorphous material and thinfilm varieties. Currently, crystalline silicon panels are the most commonly used PV systems. However, silicon is expensive and in short supply.

Production Cost

High production costs make silicon panels too expensive for the average consumer in India. Companies are researching alternatives such as thin film systems as well as other non – silicon options to bring down the cost of production and make PV solar panels widely accessible. Photovoltaic systems are developed using specific combinations of solar cells. Basically, PV systems are available in two designs, which are flat – plate and concentrator panels. As of now, most of PV solar panels sold in the World are constituted of crystalline silicon cells.

Solar shingles also use PV technology. These power generators are designed to look like regular roof shingles and the advantage is that they are quite often capable of providing power even when the roof is partially shaded.

How PV Cell Works?


PV solar panel do not require direct sunlight, they can also function properly in daylight. This photovoltaic technology product electricity even in cloudy weather. A PV cell is made up of one or more layers of semi – conducting material, which is normally silicon. When the PV cells receive sunlight, electric field develops around the layers which helps in the flow of electricity. The intensity or strength of PV cells is measured in terms of the energy they generate in maximum sunlight and is referred to as kilowatt peak or KWP.

PV systems connected to the grid require hardly any maintenance apart from ensuring that they are kept clean and are not in the shade from surrounding trees.

What are the Uses of Photovoltaic Cells?

Photovoltaic technology can be used to power consumer appliances as well as large electrical systems in the commercial sector. PV Solar panels water pump used for irrigation and drinking water distribution. You can benefit from solar panels installed on your roof or wall so long as your house is not in the shadow of other buildings or large trees. Shade reduces the output of solar modules. Also, these panels can be heavy and the surface on which they are installed must be strong enough to support them.

This technology is more or less environmentally benign. Though the manufacturing process of PV panels is polluting to a certain extent, these panels are eco – friendly to use. Solar photovoltaic power does not emit greenhouse gases.

Thin – film technologies are being adopted by a few solar panel manufacturers because they use no polysilicon. The cost of thin films is less compared to silicon cells as the technology used to made is wafer thin layers of photosensitive material and the manufacturing process consumes less energy. Thin films can be embedded in roof shingles, windows and sidings. Over the past two years or so, thin film production has increased almost four times, accounting for over 10% global market share.

The Global PV cell installation surpass to 150 GW in 2021 in the world. Globally, Jinko panels are reported to be the most efficient solar PV panels on the market. The other major global producers are SolarEdge, SMA Solar, Risen Solar, LONGi Solar and Q – Cells. With rising oil prices and growing awareness of the need to adopt environment friendly energy sources, the market for photovoltaic technology is poised for healthy growth.

Pro’s and Con’s of Alternative Energy

The advantages of using solar energy would include: a significant price reduction in your power bills, it is quite easy to install as well as maintain, it produces little to no carbon emission and is very environmentally friendly and the extra energy that you have left over can be fed back into the electrical grid which would earn you credits. The use of solar energy as an alternative resource for energy is very popular nowadays.

This is not surprising since it is the easiest to use when compared to the other resources but there are certain disadvantages to using it too. Here are a few: in order to produce enough energy that would power an entire home, you would need quite a number of panels and the thing is that these panels aren’t exactly the most affordable thing out there, not to mention the fact that they can take up a lot of space.

Nonetheless, solar energy still proves to be the best option for most people despite of its obvious disadvantages. Besides, you can always start small and have enough panels that would lower the amount you have to pay for each and every month. Remember, every little bit counts. So there you have it, just some of the things that you need to know about solar power when it comes to its alternative energy advantages and disadvantages.

Author Bio:

Sophia Wilson is a content creator and senior marketer at Isolux Solar. She enjoys researching various topic and writing to spread knowledge to the reader.

google news
Continue Reading

Home Improvement

Should You Consider a Tankless Toilet System?




The bathroom is one common part of the house that usually undergoes home renovations. In a bathroom, the focal point of the upgrade is normally the toilet. With the many bathroom toilet models these days, homeowners have a lot of options to choose from. One of the increasingly popular toilet options today is the tankless toilets.

As its name suggests, the tankless toilet does not have a tank that makes use of gravity in flushing out the waste. Instead, it utilizes a powerful flush action to eliminate waste. Home tankless toilets have a motorized pump mechanism that pumps in a certain amount of water to the bowl.

There are certain benefits of a tankless system that makes this type of toilet ideal for a basement bathroom toilet as well as bathrooms located in other parts of the house. First of all, the tankless toilet results to more space within the bathroom. The toilet can be placed in almost anywhere, with only the link to the plumbing as the consideration.

A homeowner can either choose to install the toilet against the wall, or facing the wall with the water pipes connected from underneath the floor and through the bowl. Such toilet is ideal for homeowners who want more freedom in designing their bathroom layout. Since there is no tank, there is more than enough space to accommodate other fixtures like shelves, cabinets, and tables. The addition of these functional bathroom items can greatly help to improve its functionality.

Since the tankless toilet system makes use of an electric pump mechanism, there is the risk that the toilet would not function when there is an electric outage. Thus, homeowners opting to use them in their basement bathroom toilet or in any other bathrooms need to have an emergency generator. This is perhaps the major drawback of using this type of toilet system.

But overall, the use of tankless toilet systems offer a new way of improving the overall look and functionality of a bathroom without requiring too much space.

google news
Continue Reading

Home Improvement

What Are the Advantages of Choosing a Wall Hung Basin for Your Bathroom?




Picture the scenario – you have bought your new home, however, the bathroom needs a complete refurbishment. One of the first questions you are likely to think about is what type of bathroom sink, or basin, you would like for your bathroom. In this article we will learn more about the wall hung basin, or wall mounted basin, and consider some of the advantages and disadvantages of choosing a wall hung basin for your bathroom.

Firstly, what is a wall hung basin? It is fairly simply a bathroom sink which essentially hangs or is suspended, in the wall. It is important to realise that it is not supported by a pedestal unit, or fitted over a bathroom unit. So what are some of the advantages of choosing this type of bathroom sink?

One of the biggest drawing points to wall mounted basins is the flexibility in the height of the actual basin. This is especially beneficial in houses with children – as they will hopefully be able to easily access the sink and wash their hands. This is also extremely helpful if you have any disabled or wheelchair users within the house, as they will also benefit from the lowered height of the mounted basin.

The very design of a wall mounted basin is also a significant advantage. As it does not use any type of stand, the basin will take up less space, especially on the floor. This allows these types of basin to be installed in almost any sized bathroom or cloakroom, and will more than likely fit comfortably. The disadvantage of a pedestal basin is that it can sometimes be more clunky and take up some of that crucial space which is needed.

Wall mounted basins are also easier to clean. Again the aesthetics of the design mean that the only real cleaning point is the actual basin. As there is no stand or any other clunky parts to the basin, the process of cleaning a wall hung basin should be relatively quick and simple.

If you are designing, or even redesigning, your bathroom – especially if you are seeking a more minimalistic look, then this type of bathroom sink may be the ideal choice for you. You should, however, be aware that there are also some potential disadvantages to choosing a wall mounted basin.

We mentioned above about the minimalistic look that a mounted basin can provide. However, this is both positive and a negative. The very design of the basin means that there is a lack of storage space associated with the sink. A lot of bathroom sinks will usually come with some type of cupboard space below the sink, where people usually keep other bathroom accessories such as toilet roll, soap or anything else. With the mounted sink, it can mean that you have to find a different place to store your bathroom accessories.

There is also the added financial cost of the installation of a wall mounted sink. As the plumbing cannot be hidden within a bathroom unit, it will need be to properly fitted by a plumber. Although the costs of plumbers can be reasonable, it will still increase your overall costs.

It is clear that wall mounted bathroom sinks do provide a large number of advantages. In the right type of bathroom, this can be a perfect choice and really enhance the look and feel of the bathroom. Whatever decision you make – always consider all of your options and the individual characteristics of your bathroom – and choose the right option for yourself.

google news
Continue Reading