Connect with us

Tech

How to Reach the Next Level in Your Running

Published

on

Reach the next level of your running potential by focusing on foot strike, cadence, terrain, speed work and finally brick sessions.

There are several essentials to work into your training regardless of the total volume you actually complete. Just as the source of the calories in your diet is as important to your health as eating the right amount of food, the type of run training you do is going to be linked to your run fitness just as much as the total volume you undertake.

The five key areas are as below.

Fist and foremost is the Foot Strike.

Unless you are up in the wildness or a desert island then you are likely to be a heel-striker. This means that each time your foot comes into contact with the ground you put on the brakes just slightly until your center of mass gets over and past the midfoot. At that point gravity starts helping you again with a vector of force that accelerates your forward momentum free of charge. If you are running fast, the slight deceleration that takes place when your heel hits the ground first is not going to be noticeable. However, in a long race, if you end up very fatigued, the braking action of a heel strike is, well, striking and very noticeable.

So here’s the drill. Go to a track or grass field if you can’t find a track/have access to one and run a lap or two without shoes or socks. I guarantee that you will instantaneously start to land on your midfoot or maybe even slightly forward of it.

This subtracts any braking action that a heel strike would have and immediately converts your running form to its most efficient foot plant pattern. Now put the shoes back on and try to continue to run with that same feel you had without the shoes.

Do this drill daily until you can replicate the midfoot strike and hold it throughout your training runs. Over time this will become your normal run form.

Next and as equally as important is Cadence.

One thing that you will notice after perfecting a midfoot strike is that you get on and off your feet more quickly with each foot plant. This naturally increases your cadence, which is something that will benefit every runner. Elite runners have about the same cadence as top cyclists, hitting the ground about 90 times per minute if strikes are counted on one side. Slower inefficient runners are down around 70-80 foot strikes per minute, which means that they are spending more time on the ground with each foot, and are usually guilty of braking by striking with the heel.

Increasing your cadence starts with getting to a midfoot strike. It is much easier to increase from 80 to 90 strides per minute with a midfoot strike than it is if you are landing heel-first. Generally, heel-strikers end up overstriding, especially when they attempt to go faster or when they try to increase their leg turnover.

Another way to increase your run cadence to that of an elite runner is to carry that same goal over to your cycling. If you are pushing 75 revolutions per minute (rpm) on the bike for hours on end, it will be very tough to get off and suddenly turn your tired legs over at 90 rpm on the run. However, watching your cadence on the bike and keeping it at 90-95 rpm for the bulk of your riding will help carry you to a similar cadence when it’s time to run.

The final tip on foot strike and cadence is to practice it on every run, even your slow recovery runs. Just because you’re running slowly on a recovery day does not mean that you should have a slower cadence or revert to a heel strike.

Next up is the voice of Terrain.

Hills or flat, Roads or trails? These are choices we make when we head out for every run workout. Each has its place and purpose in helping you become a faster runner. Trails have several advantages. The uneven terrain forces your feet and legs to manage some sideways motion and to create stability on slightly unstable ground. This strengthens lots of smaller support muscles that just don’t get worked by the predictability of pavement. Then, later in a race when you start to fatigue, these small muscles can come into play to help support the larger muscles as they tire, which allows you to maintain good form and stay efficient much longer than if you never do any trail running. A second benefit to trails is that the jarring on your body is less than on pavement, which enables a person to put in more training miles with less breakdown. The net result is more training volume and training consistency with less likelihood of injury.

But there is a reason to run on the roads as well. Unless you are going to be racing on a trail it is important to have your legs adapted to the impact of pavement. Early in my career I did almost all my run training on trails, especially my longer runs. However, when I got to Ironman I found that running the marathon on pavement caused a huge amount of muscle breakdown, and the critical switch point where the impact surpassed the brain’s override mechanism hit at around the half-marathon point. This meant it became impossible for me to actually run the second half of the run. Finally in 1989 I figured this out. I gradually transitioned to running more miles on the roads as I got closer to Ironman, so that my leg muscles and joints were adapted to the added impact. The results were profound. I still had some breakdown, but the big impasse where I had struggled in previous years didn’t hit me until I was within a couple of miles of the finish. At that point, the horse could smell the barn and I was able to keep my pace up.

The actual profile of your training terrain is also important. If you have hills in your race, you will want to run them in training. Same for flat courses. Bounding up hills won’t be the most effective way to get you ready to run fast on a dead flat course. A variety of training terrain is ideal for building overall run fitness and also for preventing repetitive motion injuries that running on one single terrain type can cause. As you get close to your key races, transition to doing around two-thirds of your runs on the terrain that you will encounter on race day. Then split the remaining third of your runs between the two other terrain options (hilly, rolling or flat) that are less a part of your race course profile.

The Infamous Brick.

As a triathlete, running off the bike is a skill that must be perfected in training. Even though both sports use your legs, your body is in very different positions for each and the muscles that get used, as well as the range of motion for the two sports, are very different. There is a transition period that happens when you get off the bike and start running where your cycling muscles gradually stop trying to do their job and your running muscles start to take over. A brick workout trains you to make this transition quickly and efficiently.

When it comes to brick workouts, the main decision you have to make is the length of run you should do. An efficient brick workout should be a bike ride that is followed fairly quickly with a run of about 20-50 minutes. This is not an endurance-building run, but rather a neurological transition workout that is teaching your brain how to disengage your cycling muscles and engage your running muscles. The endurance you need to complete the actual run in your triathlon, even an Ironman, is gained from a combination of your over-distance training on the bike and from your long run workouts. Running more than about 8-10 miles off the bike can cause muscle breakdown that enters the unsafe zone. It is best to save those extended runs off the bike for race day when you are not going to be demanding that your body to go out the next day and train again.

If you have never done a brick, start by doing the run after a short ride, and then gradually transition to doing them after your longest ride of the week. It is not necessary to do a brick every week, especially if it takes more than a couple days of recovery to get your legs back to normal. When doing a brick, try to do the run before you let your energy level come down from the ride. You don’t necessarily have to run the second you get off the bike, but don’t wait until you’re in front of the fridge looking for a snack while making a few phone calls. As long as you’re running within about 15 minutes of finishing your ride, you’ll be able to reap all the physiological benefits of the brick.

And equally as infamous Speed Workouts.

To run fast in a race you first have to run fast in your workouts. However, just like a brick workout, more is not always better when it comes to doing speed work. A total of 15-20 minutes of fast running in a speed session does the trick. Thirty to 40 minutes of speed work is too long to be able to go fast enough to garner the big gains that anaerobic training can give you. One of the markers that becomes elevated from doing speed work is your VO2 max, which is a measure of your ability to take up oxygen. The more oxygen you can get in for any unit of time, the more likely it is that you will be able to go faster. In running, the biggest gains in VO2 max come when you approach your maximum heart rate. (Cycling and swimming get those gains at lower heart rates.)

So let’s say you are doing a speed session on the track where you are trying to run 10 x 1000 meters. You will likely find that because of the length of this workout you are only able to go fast enough to get your heart rate up to something like 160 beats per minute (bpm) rather than closer to your max heart rate (let’s say 180 bpm for this example). Certainly you will be very tired from the workout, but you will not have gotten as much benefit out of it as you could have. However, if you shorten that workout to 5 x 1000 meters, now you will likely find that you can indeed push fast enough to get your heart rate up to over 170 on the last few 1,000’s and you will get the biggest bang for your buck from the interval session.

http://www.sisuracing.co.uk

Tech

How to Record Zoom Meeting as a Participant & Without Host Permission

Published

on

Zoom meetings are fast-paced and frenetic, which makes it challenging for your team to stay on the same page. This can make it difficult to keep discussions brief and concise. To help keep everyone on the same page, you can use a Zoom meeting recording app. Participants can listen to the meeting and take notes without disrupting the flow of the meeting. The best part? You don’t need to be an IT pro to set up a Zoom meeting recording. Follow these simple steps to start recording your team’s meetings.

What is a Zoom Meeting Recording?

Unlike a normal meeting, which is audio-only, a Zoom meeting allows you to both see and hear everyone in the meeting room. Zoom takes notes during the meeting and sends the audio recording straight to your inbox. Then, you can edit and annotate the recording with your team’s comments. You can also share the recording with others who are on the meeting attendee list. Once you start recording, you can pause and resume the Zoom recording if you need to. And don’t worry, your team won’t be able to see that you’re recording them. Zoom offers several different recording options, so you can find one that works for your team.

Record Your Team’s Meetings with Zoom

If you’re looking to start recording your team’s Zoom meetings, consider setting up a recurring meeting. Every week, you can schedule a Zoom meeting to record the meeting. This makes it easier to stay consistent. You can also use a Zoom meeting recording app like Webex Meetings or Zoom to record your team’s meetings on your smartphones and tablets. Before you can record a meeting, make sure the option is turned on in your Zoom settings. Next, invite everyone to join the meeting via the company-wide Zoom app.  If you have any questions about the recording, click “Ask the host” and send an email to the host.

Set Up a Zoom Meeting Recording

While recording a Zoom meeting is convenient, you’ll want to make sure it’s set up correctly. Begin by inviting everyone who will be invited to the meeting to join via the Zoom app. Then, start the meeting and make sure the “Record” option is turned on. If the meeting is audio-only, then you won’t be able to record it. But, you can use a screen recorder like Camtasia to record the meeting. If the meeting is audio-only, then you won’t be able to record it. But, you can use a screen recorder like Camtasia to record the meeting. Once the meeting is finished recording, you’ll be able to view and edit the recording in your Zoom inbox. When you’re ready to save it, select “Save” from the header. If you have any questions, you can send an email to the host or host leader.

how to record zoom meeting

If you’re looking to start recording your team’s Zoom meetings, consider setting up a recurring meeting. Every week, you can schedule a Zoom meeting to record the meeting. This makes it easier to stay consistent. You can also use a Zoom meeting recording app like Webex Meetings or Zoom to record your team’s meetings on your smartphones and tablets. Before you can record a meeting, make sure the option is turned on in your Zoom settings. Next, invite everyone to join the meeting via the company-wide Zoom app. Once everyone has accepted the invite, they will automatically be added to the meeting. Then, you can start the meeting and begin recording.  When you’re ready to save it, select “Save” from the header. If you have any questions, you can send an email to the host or host leader.

screen recorder

If you want to start recording your team’s Zoom meetings, you can use a screen recorder like Camtasia. This will allow you to record the meeting audio and take screen recordings. If your team uses Zoom, you can also use a screen recorder like Camtasia to record the meeting audio and take screen recordings. This will help you stay on the same page with your team. Once you’ve set up your Zoom meeting recording, host the meeting and start recording. Then, start the screen recorder to record the meeting audio and take screen recordings. You can use these recordings to help your team stay on the same page. Make sure to set the screen recorder’s audio level to “Mic +” or “Mic Only.” This will make sure you don’t accidentally record the meeting audio. Next, share your screen recordings with your team. They can then view and edit their screen recordings to make sure everyone is on the same page.

wrap up the meeting after the recording

 When you’re ready to save it, select “Save” from the header. END the meeting by announcing that it’s time to end the meeting. If you want to add a closing remark, then do so. But, make sure to announce that the meeting is over. If you have any questions, you can send an email to the host or host leader. END the meeting by announcing that it’s time to end the meeting. If you want to add a closing remark, then do so. But, make sure to announce that the meeting is over. If you have any questions, you can send an email to the host or host leader.

screen recorder Windows 10

One benefit of recording your team’s Zoom meetings is that you can use a screen recorder like Camtasia. This will allow you to record the meeting audio and take screen recordings. If your team uses Zoom, you can also use a screen recorder like Camtasia to record the meeting audio and take screen recordings. This will help you stay on the same page with your team. Make sure to set the screen recorder’s audio level to “Mic +” or “Mic Only.” This will make sure you don’t accidentally record the meeting audio. Next, share your screen recordings with your team. They can then view and edit their screen recordings to make sure everyone is on the same page.

Continue Reading

Tech

6 Tik Tok Mistakes To Avoid For Building A Good Marketing Strategy

Published

on

6 Tik Tok Mistakes To Avoid For Building A Good Marketing Strategy

Sometimes we people can lag having something new in a day, but our technology speed would never. Tech fields have touched spikes from the past to now by seeing the launch of social networking sites every day. If it comes to sharing an example, then nothing can beat the craze of Tik Tok marketing that people are still in the same passion and looking to shift to another platform that helps them gain popularity within a night. Counting the estimate from past years, Tik Tok has reached 800 million+ fans worldwide.

Tik Tok has gained massive success till it has ruled the market singlehandedly. But there are some mistakes if tackled with time then, the future can be different for it. If you want to build a good brand identity, you must avoid some mistakes that help you eliminate the situation that might become a hurdle for you in the future ahead.

  • Not Targeting The Right Audience.

The most common reason for not surviving TikTok in the market so long is that it is mainly coming into force to entertain the public at large. As it has whooping popularity with 8-00+ billion followers, people have started placing their ads on that. So selecting the niche where you need to target your audience is very important for avoiding mistakes for existence.

  • Not Being Fun

Before posting something on any social media or engaging platform, we have to analyze the content that needs to be placed accordingly. Like TikTok is a platform for entertainment and fun, you can’t place serious and wooden content there for gaining views. It’s just like you are ruining the pace of things meant to be there.

  • Not Sharing User-Generated Content

It needs to be deeply researched into what kind of videos can gain a high engagement rate. Not all kinds of videos are supposed to be posted there, as TikTok marketingdemands user-generated content. Try to build or gain the trust of your followers by making them feel comfortable with your linking. 

  • Not Feeling The Urgency Of Influencers

People love to believe those they feel more engaged with regularly or more frequently. So taking support from influencers to boost engagement on your platform would be a great move that can help you increase your brand visibility and increase followers’ reach. 

  • Lagging In Hashtag Challenges

If you have stepped into social media platforms, you must have good knowledge of how beautifully you can use hashtags. So sit and research what could be the best hashtags that can go well with your brand reach and how you can use them to increase your audience range.

  • Not Looking Realistic

Excessive promotional activity can snatch the realness out of your brand. Alternatively, you can go with content that indirectly benefits your product or services. Finally, try to adopt a more natural approach to encourage the brand so that followers love to become a part of your journey.

Takeaway

If you are searching for a reference where you can get all the amazing things done with your social media handles, you can reach out on the page ‘Socialboosting“. If your purpose is to increase the number of followers, boost engagement, Quality followers, and marketing tips, you should not delay reaching out there. Give it a right try in just the right way.

Continue Reading

Tech

Secrets to AI PRAPHRASING TOOL

Published

on

web 4861609 640
PRAPHRASING TOOL

If you’re like most people, you probably think that artificial intelligence (AI) is some sort of magic. After all, it can do things like read and understand human language, recognize faces and objects, and even beat humans at complex games like chess.

But the truth is, AI is just a tool. And like any tool, it can be used for good or for bad.

In this article, we’re going to talk about some of the ways that AI can be used for evil purposes. 

We’ll also discuss what you can do to protect yourself from these malicious uses of AI.

1. Creating Fake Videos and Photos

One of the most worrying ways that AI can be used for evil purposes is to create fake videos and photos. This is also known as “deep fakes.”

Deep fakes are created by using a type of AI called a generative adversarial network (GAN). A GAN consists of two neural networks: a generator and a discriminator.

The generator creates fake data, while the discriminator tries to distinguish between the real and fake data. The two networks compete with each other, and as they do, the generator gets better and better at creating realistic fake data. Check RemoteDBA for more details.

Deep fakes have been used to create fake celebrity porn, as well as political propaganda. In 2018, for example, a deep fake video of Barack Obama went viral. The video featured Obama saying things that he never actually said.

2. Stealing Your Personal Data

Another way that AI can be used for evil purposes is to steal your personal data. This is possible because many popular applications and websites use AI to recommend content to you based on your interests.

In order to do this, these applications and websites need to collect data about you. This includes things like your age, gender, location, and what you like to do online.

Once they have this data, they can sell it to advertisers or use it to influence your behavior.

3. Manipulating the Stock Market

AI can also be used to manipulate the stock market. This is possible because there are now algorithms that can automatically trade stocks based on certain conditions.

Some of these algorithms are designed to take advantage of human behavior. For example, they may buy stocks when prices are low and sell them when prices are high. This can result in huge profits for the people who own these algorithms, but it can also crash the stock market.

4. Disrupting Elections

AI can also be used to disrupt elections. This is possible because AI can be used to create fake news articles and social media posts. These fake articles and posts can then be spread by bots, which are automated software programs that control online accounts.

Bots can be used to automatically like, share, and comment on content. They can also be used to message people en masse. This means that they can easily influence what people see on social media and other online platforms.

If you’re like most people, you probably think that the best way to get better at paraphrasing is to practice on your own. However, this isn’t always the case. While it’s true that practice makes perfect, there are some other things that you can do to help improve your paraphrasing skills. 

In this article, we’ll share with you some of the secrets to becoming a master paraphrase.

The first secret is to understand what you’re reading. This may seem like a no-brainer, but it’s actually very important. When you’re reading something, take the time to think about what it means. If you can’t understand it, chances are you won’t be able to paraphrase it correctly. 

The second secret is to take your time. Don’t try to paraphrase something if you’re in a hurry. If you rush, you’re likely to make mistakes. Instead, take your time and focus on getting it right. 

The third secret is to practice, practice, and practice. The more you practice, the better you’ll become at paraphrasing. To find a text that you can use for practice and start working on it. 

Conclusion:

By following these secrets, you’ll be well on your way to becoming a master paraphrase. So get out there and start practicing!

If you want to improve your paraphrasing skills, there are a few things you can do. One is to practice on your own, and another is to understand what you’re reading. You should also take your time when paraphrasing, and focus on getting it right. And finally, keep practicing!

Continue Reading

Trending