After purchasing a used car, some drivers try to take it to a technical center for diagnostics to check its technical condition. But most new owners of used cars, unfortunately, neglect such diagnostics. And in vain. Of course, this is largely due to excessive spending of money. But remember that you save on your own safety. When buying a used car, you should know exactly what condition the vehicle is in. This requires a comprehensive review of the main and important systems on which your security depends. And it is crucial to check a vehicle before the acquisition.

The importance of scrupulous car checking

Modern cars are full of sophisticated, high-tech equipment. Many complex technical systems are created to ensure security. For example, airbags. But to check them, you will have to carry out computer diagnostics by contacting specialists. In addition to electronics, every car has many components, the failure of which can put the life of the driver and passengers at risk. That’s why you should check critical systems such as tires, steering components, suspension components, vehicle support structures, and all fluids. Having made sure that the technical condition of these elements is working, you will be able to sleep peacefully. But keep in mind that every verification should get started with the Faxvin service that will make it possible to investigate the history of the vehicle you are about to acquire. These are the assemblies you have to check.

Tires

Never try to save money on tires. You should not drive a car with bad tires. If they are in a poor condition, be sure to discuss the cost of the vehicle, having deducted the price for the replacement of tires.

Brakes

One of the main safety features of a car is a good braking system that stops the car if necessary. There are a few things to look for when inspecting a car: inspect brake hoses for damage, brake pipes, brake fluid capacity, fluid leaks, pads, cylinders, and calipers.

Fuel tubes and hoses

The next thing you should definitely check is a possible fuel leak. To begin with, it is necessary to inspect the fuel hoses and tubes in the engine compartment in the injector or the carburetor (depending on the type of injection used in the car). You should make sure that there is no leak in the fuel hose fitting. If a fuel filter is installed on the fuel hose, you should check the connection between the hose and the filter for possible leaks.

Also, check the reliability of the clamp connections, as well as the possible presence of moisture on the fuel hoses and their joints. If the fuel hose is wet, fuel may leak.

Structural integrity (rust, dents, and holes in the body)

If the suspension of the car is in normal condition, this does not mean that the chassis of the car is reliable. If the bolts and other fastening parts of the suspension are screwed into the body, this is a sign of corrosion. Remember that if the bolts are screwed to the rotten elements of the body, then they can break down at any moment.

Therefore, when inspecting the car, pay attention to the presence of rust in those places where the suspension elements are attached. Of course, it is crucial to conduct such an inspection before purchasing a car. If you are not sure of your abilities to detect possible problems, resort to professional assistance.